Hearth and Home Technologies 42H-B, 42-B Operating Instructions, Before Lighting Appliance

Page 20

10 Operating Instructions

A. Before Lighting Appliance

Before operating this appliance, have a qualified technician:

Remove all shipping materials from inside and/or underneath the firebox.

Review proper placement of logs, rockwool, lava rock and vermiculite.

Check the wiring.

Check the air shutter adjustment.

Ensure that there are no gas leaks.

Ensure that the flow of combustion and ventilation air is not obstructed (front grilles).

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier.

WARNING

Do NOT use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation and cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as appliance.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other combustibles away.

20

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B4036-909 • Rev L 10/09

Image 20
Contents Hot glass will cause burns This appliance must be installed outsideWhat to do if you smell gas Congratulations Listing Label Information/LocationTable of Contents Appliance Certification BTU Specifications Glass SpecificationsHigh Altitude Installations Listing and Code ApprovalsMoisture Resistance Design and Installation ConsiderationsGetting Started Any such action may cause a fire hazard Tools and Supplies NeededInspect Appliance and Components Framing and Clearances Select Appliance LocationFire Risk Fire Risk Odor RiskClearances Mantel ProjectionsTermination Locations Vent Termination Minimum ClearancesSecuring and Leveling Appliance Remove Logs and Shipping CoverGas Information Fuel Conversion Gas ConnectionGas Pressure Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Valve Access Lift Out DoorsShock Risk Intellifire Ignition System WiringElectrical Information Finishing Noncombustible Facing Diagram Facing Material Appliance Setup Clean the Appliance Grate Assembly Placement Positioning the LogsFront Log SRV727 Placing Lava Rock Glass AssemblyReinstall Door Lock Operating Instructions Before Lighting ApplianceLighting the Appliance Do not connect 110 VAC to the control valveFrequently Asked Questions Fire Risk High TemperaturesIssue Solutions After the Appliance is LitIntellifire Ignition System TroubleshootingSymptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Valve Service and Replacement Tools RequiredGround Wire Maintenance and Service Tasks Inspect Maintenance TasksAppliance Dimension Diagram Reference MaterialsService Parts List DAKOTA42-B, DAKOTA42H-BParts List Service#1BoxSet711Log-4036 This page intentionally left blank This page intentionally left blank Warranty Coverage Warranty This warranty is void ifDDO is N CAO T R D Contact Information
Related manuals
Manual 36 pages 27.89 Kb