Hearth and Home Technologies 42H-B, 42-B Facing Material, Noncombustible Facing Diagram

Page 16

B. Facing Material

WARNING

Fire Risk

Do NOT obstruct air inlet or outlet grilles.

Do NOT modify grilles.

•Modifying or covering grilles could cause temperature rise and fire hazard.

Finishing materials must not interfere with:

•Air flow through grilles or louvers.

•Operation of louvers or doors.

•Access for service.

Finish wall material may be combustible, top & sides.

Upper front can be covered with non-combustible material or removed and replaced with non- combustible material.

 

 

0 in.

0 in.

Sealant Material

0 in.

 

 

Figure 8.2 Noncombustible Facing Diagram

WARNING

Fire Risk

Finish all edges and fronts to clearances and specifications listed in manual.

•Metal appliance front may be covered with non- combustible material only.

•Do NOT overlap combustible materials onto appliance front.

•Install combustible materials up to specified clearances on top front and side edges.

•Seal joints between the finished wall and appliance top and sides using only a 300° F minimum sealant.

16

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev L 10/09

Page 15 Page 17
Image 16
Page 15 Page 17
Contents What to do if you smell gas This appliance must be installed outsideHot glass will cause burns Congratulations Listing Label Information/LocationTable of Contents Appliance Certification BTU Specifications Glass SpecificationsHigh Altitude Installations Listing and Code ApprovalsGetting Started Design and Installation ConsiderationsMoisture Resistance Inspect Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Framing and Clearances Select Appliance LocationFire Risk Fire Risk Odor RiskClearances Mantel ProjectionsTermination Locations Vent Termination Minimum ClearancesSecuring and Leveling Appliance Remove Logs and Shipping CoverGas Information Fuel Conversion Gas ConnectionGas Pressure Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Valve Access Lift Out DoorsElectrical Information Intellifire Ignition System WiringShock Risk Finishing Noncombustible Facing Diagram Facing MaterialAppliance Setup Clean the ApplianceGrate Assembly Placement Positioning the LogsFront Log SRV727 Reinstall Door Lock Glass AssemblyPlacing Lava Rock Operating Instructions Before Lighting ApplianceLighting the Appliance Do not connect 110 VAC to the control valveFrequently Asked Questions Fire Risk High TemperaturesIssue Solutions After the Appliance is LitSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Maintaining and Servicing the Appliance Valve Service and Replacement Tools RequiredGround Wire Maintenance and Service Tasks Inspect Maintenance TasksAppliance Dimension Diagram Reference MaterialsService Parts List DAKOTA42-B, DAKOTA42H-BParts List Service#1BoxSet711Log-4036 This page intentionally left blank This page intentionally left blank Warranty Coverage Warranty This warranty is void ifDDO is N CAO T R D Contact Information
Related manuals
Manual 36 pages 27.89 Kb

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.
Top Page Image Contents