Hearth and Home Technologies 42-B, 42H-B owner manual Lighting the Appliance

Page 21

B. Lighting the Appliance

Intellifire Ignition

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

LIGHTING

INSTRUCTIONS

1.

Turn off wall switch.

2.

This appliance is equipped with an igni-

A. This appliance is equipped with an intermittent pilot ignition (IPI) device which automatically lights the burner. Do not try to light the burner by hand.

B. BEFORE LIGHTING, smell all

around the appliance area for gas. Be sure to smell next to

the floor because some gas is

heavier than air and will settle on

the floor.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas sup- plier, call the fire department.

C.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

tion device which automatically lights the

burner. Do not try to light the burner by

hand.

gas

valve

3. Wait five (5) minutes to clear out any gas.

Then smell for gas, including near the

floor. If you smell gas, STOP! Follow “B”

in the Safety Information located on the left

side of this label. If you don’t smell gas,

go to next step.

Warning:

Do not connect 110 VAC to the control valve.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property dam- age. Refer to the owner’s infor- mation manual provided with this appliance.

This appliance needs fresh air for safe operation and must be installed so there are provisions for adequate combustion and ventilation air.

If not installed, operated, and main- tained in accordance with the man- ufacturer’s instructions, this product could expose you to substances in fuel or fuel combustion which are known to the State of California to cause cancer, birth defects, or other reproductive harm.

Keep burner and control compart- ment clean. See installation and operating instructions accompanying appliance.

Caution:

Hot while in operation. Do not touch. Keep children, clothing, furniture, gasoline and other liquids having

flammable vapors away.

Do not operate the appliance with panel(s) removed, cracked or bro- ken. Replacement of the panel(s) should be done by a licensed or

qualified service person.

Not for use

with solid fuel

For use with natural gas and pro- pane. A conversion kit, as supplied by the manufacturer, shall be used to convert this appliance to the al- ternate fuel.

4.

Turn on wall switch.

5.

To light the burner, flip the ON/OFF

 

switch to the “ON” position. (The ON/OFF

 

switch may include a wall switch if so

 

equipped).

6.

If the appliance will not operate, check

 

battery then follow the instructions “To

 

Turn Off Gas to Appliance” and call your

 

service technician or gas supplier.

TO TURN OFF GAS TO APPLIANCE

1.Turn off all electric power to the appliance if service is to be performed.

2.Flip ON/OFF switch to the “OFF” posi- tion.

Final Inspection by _________________________________

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev L 10/09 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents This appliance must be installed outside What to do if you smell gasHot glass will cause burns Listing Label Information/Location CongratulationsTable of Contents Glass Specifications Appliance Certification BTU SpecificationsHigh Altitude Installations Listing and Code ApprovalsDesign and Installation Considerations Getting StartedMoisture Resistance Tools and Supplies Needed Inspect Appliance and ComponentsAny such action may cause a fire hazard Select Appliance Location Framing and ClearancesFire Risk Fire Risk Odor RiskMantel Projections ClearancesVent Termination Minimum Clearances Termination LocationsRemove Logs and Shipping Cover Securing and Leveling ApplianceFuel Conversion Gas Connection Gas InformationGas Pressure Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Lift Out Doors Valve AccessIntellifire Ignition System Wiring Electrical InformationShock Risk Finishing Facing Material Noncombustible Facing DiagramClean the Appliance Appliance SetupGrate Assembly Placement Positioning the LogsFront Log SRV727 Glass Assembly Reinstall Door LockPlacing Lava Rock Before Lighting Appliance Operating InstructionsDo not connect 110 VAC to the control valve Lighting the ApplianceFire Risk High Temperatures Frequently Asked QuestionsIssue Solutions After the Appliance is LitTroubleshooting Symptom Possible Causes Corrective ActionsIntellifire Ignition System Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementGround Wire Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramDAKOTA42-B, DAKOTA42H-B Service Parts ListService Parts List#1BoxSet711Log-4036 This page intentionally left blank This page intentionally left blank Warranty Coverage This warranty is void if WarrantyContact Information DDO is N CAO T R D
Related manuals
Manual 36 pages 27.89 Kb

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.
Top Page Image Contents