Hearth and Home Technologies 42-B Framing and Clearances, Select Appliance Location, Fire Risk

Page 7

3 Framing and Clearances

Note:

•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.

•Illustrations/diagrams are not drawn to scale.

•Actual installation may vary due to individual design preference.

A. Select Appliance Location

When selecting a location for your appliance it is important to consider the required clearances to walls (See Figure 3.1).

WARNING

Fire Risk

Provide adequate clearance:

•Around air openings.

•To combustibles.

•For service access.

Locate appliance away from traffic areas.

Note: For actual appliance dimensions refer to Section 13.

Note: If this surface is inside the building’s warm air envelope...

...then this surface must be an exterior wall system.

G

57-3/4 in.

(1467 mm)

G

F

A

B

 

F

F

 

E

C

 

 

D

C

81-3/4 in.

(2076 mm)

 

D

E

Figure 3.1 Appliance Locations

 

A

B

C

D

E

F

G

in.

24-3/4

24-1/8

48

49

5/8

1/2

1-1/2

mm

629

613

1219

1245

16

13

38

WARNING

Fire Risk

Odor Risk

•Install appliance on hard metal or wood surfaces extending full width and depth of appliance.

•Do NOT install appliance directly on carpeting, vinyl, tile or any combustible material other than wood.

WARNING

Fire Risk

•Locate and install appliance to all clearance specifications in manual.

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev L 10/09

Page 6 Page 8
Image 7
Page 6 Page 8
Contents What to do if you smell gas This appliance must be installed outsideHot glass will cause burns Listing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Appliance Certification BTU SpecificationsGlass Specifications High Altitude InstallationsGetting Started Design and Installation ConsiderationsMoisture Resistance Inspect Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Fire Risk Odor Risk Framing and ClearancesSelect Appliance Location Fire RiskMantel Projections ClearancesVent Termination Minimum Clearances Termination LocationsRemove Logs and Shipping Cover Securing and Leveling ApplianceFire Risk Explosion Risk Gas InformationFuel Conversion Gas Connection Gas PressureFire Risk Explosion Risk Asphyxiation Risk Lift Out Doors Valve AccessElectrical Information Intellifire Ignition System WiringShock Risk Finishing Facing Material Noncombustible Facing DiagramPositioning the Logs Appliance SetupClean the Appliance Grate Assembly PlacementFront Log SRV727 Reinstall Door Lock Glass AssemblyPlacing Lava Rock Before Lighting Appliance Operating InstructionsDo not connect 110 VAC to the control valve Lighting the ApplianceAfter the Appliance is Lit Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementGround Wire Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramDAKOTA42-B, DAKOTA42H-B Service Parts ListService Parts List#1BoxSet711Log-4036 This page intentionally left blank This page intentionally left blank Warranty Coverage This warranty is void if WarrantyContact Information DDO is N CAO T R D
Related manuals
Manual 36 pages 27.89 Kb

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.
Top Page Image Contents