Hearth and Home Technologies 42-B, 42H-B Glass Assembly, Placing Lava Rock, Reinstall Door Lock

Page 19

D. Glass Assembly

WARNING

Handle glass with care.

Inspect the glass for cracks, chips or scratches.

Do NOT strike, slam or scratch glass.

Do NOT operate appliance with glass door removed, cracked, broken or scratched.

Replace glass door assembly as a complete assembly.

The glass doors are included with and pre-installed in the appliance.

To adjust doors, open them and loosen screws on top and bottom pivot pins. Slide each door as necessary and tighten screws.

To adjust handle, loosen screws to move handles as necessary and tighten screws.

E. Placing Lava Rock

After logs have been placed spread part of the lava rock (included) between the rock pan and ashlip (see Figure 9.10).

Rock Pan

Ashlip

Figure 9.10 Placement of Lava Rocks

Glass Specifications

Dakota42-B: Tempered

Dakota42L-B: Tempered

Dakota42H-B: Tempered

Dakota42HL-B: Tempered

F. Reinstall Door Lock

When logs and lava rock have been installed, or if the glass assembly has been adjusted, reinstall the door lock by inserting the screw at the top of the door. Tighten screw. You may refer to Section 5.A. if needed.

Locking Screw

Open Open

Figure 9.11 Reinstall Door Lock

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B4036-909 • Rev L 10/09 19

Image 19
Contents What to do if you smell gas This appliance must be installed outsideHot glass will cause burns Listing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Appliance Certification BTU SpecificationsGlass Specifications High Altitude InstallationsGetting Started Design and Installation ConsiderationsMoisture Resistance Inspect Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Fire Risk Odor Risk Framing and ClearancesSelect Appliance Location Fire RiskMantel Projections ClearancesVent Termination Minimum Clearances Termination LocationsRemove Logs and Shipping Cover Securing and Leveling ApplianceFire Risk Explosion Risk Gas InformationFuel Conversion Gas Connection Gas PressureFire Risk Explosion Risk Asphyxiation Risk Lift Out Doors Valve AccessElectrical Information Intellifire Ignition System WiringShock Risk Finishing Facing Material Noncombustible Facing DiagramPositioning the Logs Appliance SetupClean the Appliance Grate Assembly PlacementFront Log SRV727 Reinstall Door Lock Glass AssemblyPlacing Lava Rock Before Lighting Appliance Operating InstructionsDo not connect 110 VAC to the control valve Lighting the ApplianceAfter the Appliance is Lit Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementGround Wire Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramDAKOTA42-B, DAKOTA42H-B Service Parts ListService Parts List#1BoxSet711Log-4036 This page intentionally left blank This page intentionally left blank Warranty Coverage This warranty is void if WarrantyContact Information DDO is N CAO T R D
Related manuals
Manual 36 pages 27.89 Kb