Wayne SEL40 specifications Description, Unpacking, Safety Guidelines, General Safety Information

Page 1

Operating Instructions and Parts Manual

Models SEL40 and SEL50

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Description

A sewage system consists of a pump, control switch, and a basin­ for use in appli­ca­tions­ where less than six toilets (units) are discharged­ into the basin. The system­ is generally controlled­ by a float switch with a plug-in-plug which accepts the pump plug and in turn plugs into a 115 volt outlet.

The float switch is a wide angle differential switch that rises with the liquid level and turns the pump on. As the liquid level decreases the float lowers and turns the pump off. This pump is intend­ed­ for use in domes­tic­ sewage lift stations. It is suitable for pumping sewage, effluent, wastewater, groundwater and other nonex­plo­sive,­ noncor­ro­sive­ liquids with up to 2 inch solids.

Sewage

Pump

Unpacking

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates a potentially

hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

General Safety Information

California proposition 65

This product or its power cord contains

chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Specifications

Power supply requirements

115V, 60 hz

Circuit requirements

15 amps (min)

Motor duty

Intermittent

Motor

115V, 1 Phase, 1725 RPM

Horsepower

4/10 (SEL40); 1/2 (SEL50)

Motor full load

12 amps

Liquid temperature range

40º F to 120º F

Max. operating position

45º from vertical

Dimensions

13-1/2 inch x 11 inch

Intake

2 inch

Discharge

2 inch NPT female, 3 inch

 

NPT male

Cut-in level (factory set)

18 inch

Cut-out level (factory set)

10 inch

Differential

8 inch

Switch

90º wide angle

 

mechanical tether switch

Power cord

16 gauge 3 conductor

 

w/plug

Construction

Motor body material

Cold rolled steel

Motor housing

Glass reinforced

 

polypropylene

Volute

Glass reinforced ABS

Impeller

Glass reinforced PBT

Seal plate

Cast Iron

Shaft seal

End faced mechanical

Performance

Gallons per hour at total head in feet

Model

10

15

200

SEL40

3700

1350

0

SEL50

6420

4200

1500

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

© 2009 Wayne Water Systems

For parts, product & service information

330002-001 3/09

 

visit www.waynepumps.com

 

Image 1
Contents General Safety Information Safety GuidelinesSpecifications DescriptionTypical Installation General SafetyInstallation MaintenanceModels SEL40 and SEL50 Do not use an extension cordSymptôm Possible Causes Corrective Action Troubleshooting ChartReference Number Description Part Number Quantity Repair Parts ListDate Maintenance performed Repair components required Service RecordDirectives De Sécurité DéballageGénéralités Sur La Sécurité SpécificationsGénéralités Sur La Sécurité Suite Installation typiqueEntretien Modèles SEL40 et SEL50Ne pas utiliser un cordon prolongateur Guide de Dépannage Entretien Suite10 Fr Liste de Pièces Détachées Guide de Dépannage SuiteNuméro de Référence Description De pièce Quantité 11 FrEnregistrement d’entretien Date Entretien exécuté Éléments de remplacement requis12 Fr Desempacar DescripciónInformaciones Generales de Seguridad EspecificacionesGenerales de Seguridad Informaciones Generales de Seguridad Continuación14 Sp Instalación Modelos SEL40 y SEL50Mantenimiento No use cordones de extensiónGuía de diagnóstico de averías Mantenimiento Continuación16 Sp Lista de Partes de Reparación Guía de diagnóstico de averías ContinuaciónNúmero de Referencia Descripción De Parte Cantidad 17 Sp18 Sp Registro de ServiciosSEL40, SEL50 SEL40, SEL50

SEL40, 330002-001, SEL50 specifications

The Wayne SEL50,330002-001 and SEL40 are advanced electronic payment solutions designed specifically for the fuel retail industry. Both models are well-regarded for their innovative technologies and user-friendly features that aim to enhance the overall customer experience while ensuring efficient payment processing.

The Wayne SEL50,330002-001 is known for its robust architecture, which allows it to handle a large volume of transactions seamlessly. It is equipped with a high-definition touchscreen interface that makes navigation intuitive for users of all experience levels. The touchpad is highly responsive, facilitating quick access to various services, including fuel purchases, loyalty programs, and promotional offers. Additionally, the payment terminal's customizable interface allows retailers to tailor the experience to meet specific customer needs or branding requirements.

One of the standout features of the SEL50 is its wide range of payment options. It supports EMV chip cards, contactless payments, and mobile wallet transactions, ensuring compatibility with the latest payment technologies. This versatility not only enhances convenience for customers but also helps retailers reduce the risk of fraud. The terminal also adheres to the highest security standards, providing encryption and tokenization to protect sensitive payment information.

The Wayne SEL40 is another notable model in Wayne's lineup, designed for smaller fuel retailers or those looking for a more compact solution. It shares many features with the SEL50, including the ability to accept various payment types, but with a more streamlined interface that emphasizes simplicity and efficiency. The SEL40's compact design allows it to be easily integrated into existing retail environments without requiring extensive modifications to infrastructure.

In terms of connectivity, both the SEL50 and SEL40 offer multiple options, including Ethernet, Wi-Fi, and cellular connections, ensuring reliable performance regardless of location. Furthermore, they are equipped with remote monitoring capabilities, which enable retailers to track transaction data and system status in real-time, enhancing operational efficiency.

Overall, both the Wayne SEL50,330002-001 and SEL40 represent significant advancements in fuel retail payment technology. Their combination of user-friendly interfaces, robust security, and versatile payment options makes them ideal solutions for retailers looking to improve customer satisfaction while streamlining operations. As payment technologies continue to evolve, these models are poised to remain at the forefront of the industry.