1.Remove
BELT CHANGING AND AGITATOR CLEANING section.
Push In
And Turn 2. Push in and turn bulb counterclock-
to remove.
wise, then pull out
IbWARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before per- forming maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from
vacuum cleaner suddenly | starting, | i | |
|
|
| i |
TO CHECK BRUSHES |
|
| |
| When brushes | ||
worn | to the | ||
| level of the | base | |
| support | bars, | |
Base Support Bars | assembly. |
|
|
3. Push in and turn
And Turn I I replace. Bulb must not be higher than 15 Watts(130 Volts).
4.Reinstall
BELT CHANGING AND AGITATOR CLEANING section.
NOTE: See PARTS AND FEATURES for
Bulb number.
TO REPLACE AGITATOR ASSEMBLY
1.Remove
cover, belt and agitator assembly. See "To Remove Belt" in BELT CHANGING AND
AGITATOR CLEANING.
2.Replace agitator assembly.
3.Reinstall belt, agitator cover and Power- Mate ® cover. See "To replace belt" in BELT CHANGING AND AGITATOR CLEANING.
17