CANISTER
HOSE
1.Open the canister hood.
2.Check to see that the dust bag is proper- ly installed. See BAG CHANGING for instructions.
3.Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CHANGING for instructions.
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool
storage cover to come off when opened fur-
ther than needed. Line up the hinge slots, insert the hinges into the slots, and close
the hood and tool storage cover to reinstall.
CAUTION
Latch
2.Insert handle into wand until lock button snaps in
place. Be
sure hose is not twist- ed,
To remove: Press han- dle 'release button and pull up on handle.
1.Line up the hose latch tab and notch in canister hood and insert hose into canister until
it snaps in place. To remove: Lift hose latch tab upward and
pull up on hose.
Lock
Button
Handle
Quick
To store: Disconnect hose from wands and
canister to prevent stress on hose during storage. Store hose in a loosely coiled
position so the hose covering is net stressed.