TYPICAL INSTALLATION
GET TO KNOW YOUR WATER HEATER - GAS MODELS
A | Vent | K | Hot Water Outlet | V | Drip Leg (Sediment Trap) |
B | Vent Terminal | L | Outlet Receptacle (115 VAC) | W | Drain Valve |
C | Vent | M | X | Gas | |
D | Blower Assembly | N | Flue | Y | Drain Pan |
E | Cold Water Inlet | O | Flue Baffle Assembly** | Z | Air Intake Screen - Base Pan |
F | Inlet Water | P | Insulation | AA | Inner Door |
G | Union | Q | Control Harness | BB | Outer Door |
H | Inlet Dip Tube | R | Rating Plate | CC | HSI Burner Assembly |
J | Anode** | S | Gas Supply | DD | Air Intake Screen - |
|
| T | Manual Gas |
| Blower Assembly |
|
| U | Ground Joint Union | EE | FV Sensor Assembly |
*ALL PIPING MATERIALS TO BE SUPPLIED BY CUSTOMERS.
**LOCATED UNDER THE BLOWER ASSEMBLY.
NATURAL HOT SURFACE IGNITER & MAIN BURNER
HOT
SURFACE
IGNITOR
SENSOR
*CAUTION: 115 VAC IN CONTROL HARNESS AND INSIDE OUTER DOOR
PROPANE HOT SURFACE IGNITER & MAIN BURNER
HOT
SURFACE
IGNITOR
SENSOR
TEMPERATURE INDICATORS
TEMPERATURE ADJUSTMENT BUTTONS
GAS MODELS
WITH HOT SURFACE IGNITION
& 2", 3" OR 4" PVC VENT CAPABILITY
FIGURE1.
7