Broan RMP1 manual Maintenance, Grease Filters, Non-ducted recirculation Filters, Hood Cleaning

Page 8

MAINTENANCE

Proper maintenance of the Range Hood will assure proper performance of the unit.

Grease Filters

The grease filters should be cleaned fre- quently. Use a warm detergent solution. Grease filters are dishwasher safe.

Remove filter by pushing filter towards the back of hood and rotating filter downward.

Non-ducted recirculation Filters

The charcoal filters should be changed every 6 months. Rotate the filters to remove and replace.

Hood Cleaning

Stainless steel is one of the easiest materials to keep clean. Occasional care will help pre- serve its fine appearance.

Cleaning tips:

Hot water with soap or detergent is all that is usually needed.

GREASE FILTERS

NON-DUCTED

RECIRCULATION

FILTERS

Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water marks.

For discolorations or deposits that persist, use a non-scratching household cleanser or stainless steel polishing powder with a little water and a soft cloth.

For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid using too much pressure which may mar the surface.

DO NOT allow deposits to remain for long periods of time.

DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.

DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these com- pounds contain chemicals which may be harmful. Rinse with water after expo- sure and wipe dry with a clean cloth.

Painted surfaces should be cleaned with warm water and mild detergent only.

- 8 -

Image 8
Contents RMP1 Series English Français EspañolRead and Save These Instructions Intended for Domestic Cooking only ! WarningPage Prepare the Hood Ducted configuration Install the DuctworkInstall the Hood Connect Ductwork NON-DUCTEDRECIRCULATION Filter InstallationNon-ducted recirculation configuration Wiring Applicable national and local electrical CodesMaintenance Hood CleaningGrease Filters Non-ducted recirculation FiltersOperation Halogen BulbsControls HOTWarranty BROAN-NUTONE LLC ONE Year Limited WarrantyLisez ET Conservez CES Instructions Seulement Pour Utilisation Domestique AvertissementsPage Preparez LA Hotte Modèle avec tuyau d’évacuation Installation DU Systeme D’EVACUATIONInstallation DE LA Hotte Modèle recyclant l’air Connexion DU Systeme D’EVACUATIONAssemblage DES Filtres a Charbon Modele Installation Electrique Les lois nationales et locales en matière ’électricitéEntretien Filtres anti-graisseFiltres à charbon modèle recyclant l’air Nettoyage de votre hotteAvertissement CommandesFonctionnement Ampoules Halogenes GarantieLEA Y Conserve Estas Instrucciones AdvertenciaAdvertencia Prepare LA Campana Instalacion DE LA Campana Configuración con tuboInstalacion DEL Tubo DE Extraccion Configuración sin tubo Entubado DE CanalizacionInstalacion Electrica Siguiendo las normas nacionales y localesFiltros al carbón configuración sin tubo MantenimientoFiltros antigrasa Limpieza de la campanaFuncionamiento MandosHeat Sentrymr AvertenciaPueden Estar Calientes Lamparas HalogenasGarantia Service Parts DescriptionListe Pieces DE Rechange Part N DescriptionLista DE Piezas DE Recambio CÓD. N Pieza N Descripción04307766/1S