Graco Inc 260100, 260102, 260104, 260101 important safety instructions Pressurized Equipment Hazard

Page 3

Warnings

WARNING

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

Follow Pressure Relief Procedure in this manual, when you stop dispensing and before cleaning, checking, or servicing equipment.

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immedi- ately.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Tech- nical Data in all equipment manuals. Read fluid and solvent manufacturer’s warn- ings. For complete information about your material, request MSDS forms from distributor or retailer.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your Graco distributor for informa- tion.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

311305E

3

Image 3
Contents Apex Fire and Explosion Hazard Pressurized Equipment Hazard Installation Mounting Pump on Barrel or TankMounting Hose and Nozzle Operation Electrical Installation 115 VAC and 230 VACElectrical Installation 12 VDC Pressure Relief ProcedureProblem Cause Solution TroubleshootingTroubleshooting Parts Description Qty Technical Data Models Length a Height B Width C DimensionsPerformance Chart 311305E Graco Information Graco Standard Warranty