Pella 81470102 5INSULATING Foam Application, Apply insulating foam sealant. From the interior

Page 8

5INSULATING FOAM APPLICATION

ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL

Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the window frame to bow and hinder operation.

A. Apply insulating foam sealant. From the interior,

 

insert the nozzle of the applicator approximately 1"

Interior

deep into the space between the window and the

 

rough opening and apply a 1" deep bead of foam.

 

This will allow room for expansion of the foam and

5A

will minimize squeeze out. If using foam other than

 

Great Stuff â„¢ Window and Door Insulating Foam

 

Sealant by the Dow Chemical Company, allow the

 

foam to cure completely (usually 8 to 24 hours)

 

before proceeding to the next step.

 

Note: It may be necessary to squeeze the end

 

of the tube with pliers to be able to insert into

 

the space between the jamb boards and the

 

rough opening, and between the head and seat

 

board and the rough opening.

 

Image 8 Pella 81470102 installation instructions 5INSULATING Foam Application, Apply insulating foam sealant. From the interior
Contents Cable clamps Jamb covers Replacement Applications Remove 1ROUGH Opening PreparationRemember to USE Appropriate Personal Protective Equipment Remove all packaging from the windowSiding 2PREPARING and Setting the Window 3CABLE Clamp Installation TWO or More People will be Required for the Following StepsCross Bracing Mount NON Accessible Cable Attachment Install 2 x 6 cross braces between the rafterCross Bracing Mount of Cable Clamps Run the cable up through the bottom of the cable clampSupporting the Window Header Mount of Cable ClampsRemove blocking from under the seat board Run the cable up through the bottom5INSULATING Foam Application Apply insulating foam sealant. From the interiorVinyl Siding Replacement Wood Siding Replacement Angle Jamb Cover6SEALING the Window to the Exterior Wall Cladding If using Square Jamb Cover, Proceed to CIf using Angle Jamb Cover, Proceed to G 7INSTALLING Interior Jamb Cove Mould Cove MouldExterior Finish Care and Maintenance Important NoticeInterior Finishing