Drolet owner manual Escape 1400-I Insert

Page 1

OWNER`S MANUAL

Escape 1400-I Insert

US ENVIRONMENTAL PROTECTION

AGENCY PHASE II CERTIFIED

WOOD INSERT

Verified and tested following

ULC S628 and UL 1482 Standards

by:

Manufactured by : STOVE BUILDER INTERNATIONAL INC..

1700, Léon-Harmel, Québec (Québec) G1N 4R9

Tel : (418 ) 527-3060

Fax : (418 ) 527-4311

www.drolet.ca

READ AND KEEP THIS MANUAL FOR REFERENCE

45221

Image 1

Contents Escape 1400-I Insert Introduction Table of Contents Escape 1400-I Dimensions Masonry & Zero Clearance Requirements Pre-Installation RequirementsVenting Requirements Clearances To Combustibles Measured From Insert Body InstallationHearth Requirements Suitable Fireplace DimensionsSafety Information Installation Instructions Operation Air control plate, faceplate and fan Assembly InstructionsSafety Information Fuel Lighting a Fire Simple Wood Moisture TestDraft Settings Fan Operation Maintaining The FireCare And Cleaning MaintenanceGlass Cleaning and maintenance Ash RemovalCreosote Formation And Need For Removal Chimney CleaningBaffle installation & removal for Escape Baffle Installation for EscapeImportant Notes Secondary Air Tube ReplacementRemoval instructions Secondary Air Tube replacement Fan Maintenance & CareEscape 1400-I Insert Model SpecificationsDrolet Limited Lifetime Warranty