Introduction
The Harman Clarity 929BV Vented Gas Heater is a listed
The installation of the Clarity Vented Gas Heater must conform with local codes, or in the absence of local codes, with the current edition of National Fuel Gas Code, ANSI Z223.1 — latest edition and CAN
The Clarity 929BV is not for use in mobile homes. CAUTION: This appliance must be vented to the
outside.
Installation and repair of the Clarity Vented Gas Heater should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More fre- quent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners, and circulating air passageways of the Clarity be kept clean.
When operating your Harman Clarity Gas Heater, respect basic safety standards. Read these instructions carefully before you attempt to operate the heater. Failure to do so may result in damage to property or personal injury and may void the product warranty.
Consult with your local building code agency and insurance representative before you begin your instal- lation to ensure compliance with local codes, including the need for permits and
Several issues must be addressed when selecting a suitable location for your Clarity Gas Heater. Observ- ing required clearances to combustible materials, the proximity to a safe chimney or venting system,and the accessibility of the gas and electrical supply must all be considered. In addition, selecting a location that takes advantage of the building's natural air flow is also desirable to maximize the heating effectiveness of the heater. In many cases, this is a central location within the building.
Adequate combustion and ventilation air must be provided.