Harman Stove Company P43 owner manual Soot and Fly Ash

Page 23

Maintenance

Burn pot Clean-out plate

Fig. 28

Fig. 29

Latch "closed "with blower

Latch "open "with blower

cover in place. Burn pot

cover partly removed. Burn

clean-out is closed.

pot clean-out is open.

8.Clean the combustion blower wheel with a brush and a vacuum cleaner. Note: Do not use a household vacuum to clean the stove. We recommend that you use a shop vacuum that is equipped with a fine dust filter called a HEPA filter or a vacuum specially made for fly ash and soot. USING A VACUUM WHICH

IS NOT EQUIPPED WITH A FINE DUST FILTER WILL BLOW FLY ASH AND SOOT OUT INTO THE ROOM.

NOTE: THE STOVE MUST BE COMPLETELY OUT BEFORE YOU VACUUM THE STOVE. LIVE PEL- LETS, IF SUCKED INTO THE VACUUM WILL LIGHT THE VACUUM ON FIRE AND MAY ULTIMATELY CAUSE A HOUSE FIRE.

9.Use a brush to clean the flue, being careful not to damage the ESP probe, see Fig. 30. The flue goes straight through into the vent pipe (Fig.27) therefore, the vent pipe can also be cleaned to some extent through the flue outlet.

10.Reinstall blower cover and relatch.

11.Slide ash pan into stove and latch the door.

ESP probe

Fig. 30 Exposed blower wheel and flue opening, NOTE: ESP probe is visible.

Blower cover removed.

Brush, not supplied, can be found in hardware stores.

Fig. 32

 

ESP

 

Probe

 

Be careful not to

 

damage ESP probe

 

when cleaning with

Fig. 31

brush.

Soot and Fly Ash

The products of combustion will con- tain small particles of fly ash which must be removed from the inner walls of the stove and from the venting system periodically. Removing fly ash and soot improves efficiency, insures that the flue venting passageway is clear and unobstructed. The stove should be cleaned after each ton

of pellets (50 bags) and the venting system inspected and cleaned after each heating season.

Fig. 33

P43 Pellet Stove 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Safety Notice Installation & Operating ManualWHI Introduction Table of ContentsImportant Notes Firebrick Assembly and InstallationUnpacking Removing rear cover panelsInstalling InstallationAddition, the following must be observed With outside air installed, 6 feetVenting Vent Pipe VentingOutside Air Direct Vent Wall Passthrough Kit#2 Preferred method #1 Preferred methodFireplace chimney #4 Installing into an existing chimney#5 Installing into an existing #7 Installing into an existing chimney #6 Installing into an existing fireplace chimney#8 Installing through the ceiling Minimum flue vent configurationP43 Automatic Ignition ESP Control Status light error messagesP43 Automatic IGNITION/OPERATION Room Temperature ModeShut Down Procedure Stove Temperature ModeFeed Adjuster Knob Flame Guide SeeHint #7 P43 Automatic Start UPP43 Manual IGNITION/Operation Manual Stove Temperature ModeP43 Manual Start UP Igniter Switch toMANUAL down positionLow Draft Voltage Adjustment P43 Low Draft Voltage AdjustmentRear Shields Room Sensor and Rear Shield InstallationRoom Sensor Installation Removing Ashes MaintenanceCleaning the Door Glass CleaningSoot and Fly Ash Burn Pot Cleaning and Maintenance P43 Maintenance Burn PotPellet Fines will build up in this area P43 Maintenance Cleaning the Feeder BodyCleaning Burn Pot P43 Trouble-ShootingP43 Feeder 28.5 P43 Specifications12.375 Options P43 Wiring Diagram Description Part Number P43 Parts ListHarman Gold Warranty

P43 specifications

The Harman Stove Company P43 is a sophisticated pellet stove renowned for its efficiency, versatility, and modern design. Tailored for homeowners who seek both functionality and aesthetic appeal, the P43 offers a compelling option for heating spaces while contributing to an environmentally friendly lifestyle.

At the heart of the P43 is its impressive heating capacity. It can warm areas up to 1,200 square feet, making it suitable for a variety of home sizes. Its heat output ranges from a low of 8,200 BTUs to a maximum of 43,000 BTUs, allowing users to customize heating levels according to their needs. This adaptability is further enhanced by the unit's easy-to-use control settings that enable precise adjustments for different heating requirements and comfort levels.

One standout feature of the P43 is its efficient heat exchanger system. This technology promotes optimal combustion, ensuring that the maximum amount of heat is produced while minimizing waste. As a result, not only does this contribute to cost-effective heating, but it also enhances the stove's environmental performance by reducing emissions. The P43 is certified by the EPA, confirming its compliance with stringent environmental standards.

The P43 also integrates advanced automation technologies, such as Touch Control Technology, which simplifies the operation of the stove. Users can easily manage settings through a digital interface, allowing for setting timers, adjusting burn rates, and monitoring fuel levels. This level of automation makes it particularly appealing for tech-savvy homeowners who appreciate convenience in their heating solutions.

Another defining characteristic of the P43 is its design. With a sleek, modern look, the pellet stove is available in different finishes, allowing it to seamlessly blend into various home decors. The window remains large and unobstructed, providing a clear view of the fire and enhancing the ambiance of any room.

Additionally, Harman’s renowned build quality ensures that the P43 is not only functional but also durable. Constructed from high-quality materials, the stove is designed to offer long-lasting performance. The unit's efficient fuel feeding system minimizes the need for constant refueling, further enhancing its usability.

Overall, the Harman Stove Company P43 represents a perfect fusion of technology, efficiency, and design. Its strong performance, user-friendly interface, and aesthetic appeal make it a leading choice for those who prioritize comfort and sustainability in their home heating solutions.
Top Page Image Contents