Only For Qualified Installers | INSTALLATION | 14 |
Changing to Natural Gas
1
Remove four bolts and remove burner module from stove.
2
Use a 1/2” deep well socket to remove the LP #53 orifice and replace with the #37 Natural gas orifice from the kit.
3
Remove pilot tower with a 7/16” wrench. Replace
LP orifice with Natural Gas orifice. See instructions in kit.
Natural Gas Conversion Kit
NG Pilot Orifice
NG Orifice #37
NG Conversion label
NG Valve
Conversion
Module
NG Conversion
Instructions
Natural Gas Kit | Part No. |
This kit is only for use in the Conquest direct vent gas stove.
4
Remove the three screws that hold the LP knob module in place. Remove the module and replace with the Natural gas module from the kit. See kit instructions.