Harman Stove Company Conquest Gas Stove manual Installation

Page 9

Only For Qualified Installers

INSTALLATION

9

Burn Only the Fuel for which the Heater is Equipped

The Conquest can burn either natural gas or pro- pane, but requires a change-over kit for natural gas. The label on the burner system module indicates the fuel for which it is equipped. A second label, (on the valve) also indicates the fuel type.

Making The Connection

The gas inlet is located on the bottom right side of the stove. The inlet fitting is a 1/2" male flare fitting.

A separate gas shut-off valve and a 1/8" N.P.T. plugged tapping should be installed immediately up- stream of the connection to the appliance.

The Conquest Direct Vent Gas Heater must be disconnected from the gas supply piping during any pressure testing of that system at pressures in excess of 1/2 psig (3.5 kPa).

The Conquest gas control valve must be in the OFF position during any pressure testing of the gas supply system at pressures equal to or less than 1/2 psig (3.5 kPa).

WARNING: To avoid pipe compounds from entering into the gas train, apply compounds only to male pipe threads and do not apply compound to the first two threads.

CAUTION: TEST ALL JOINTS FOR LEAKS BEFORE OPERATING.

Gas Pressure Requirements:

Correct gas pressure and the use of a properly sized gas supply line are essential for the safe and efficient performance of this appliance. Make sure that the plumber or gas supplier checks the gas sup- ply line and gas pressure at installation.

NOTE: Improper gas pressure can affect heater performance, flame color, or cause pilot outage.

Natural Gas:

Maximum inlet pressure 7.0" w.c. (1.74 kPa) Minimum inlet pressure 5.0" w.c. (1.25 kPa) Gas manifold pressure 3.8" w.c. (0.87 kPa)

LPG Gas:

Maximum inlet pressure 13" w.c. (3.24 kPa) Minimum inlet pressure 11.5" w.c. (2.74 kPa) Gas manifold pressure 11" w.c. (2.49 kPa)

DO NOT USE THIS HEATER IF ANY PART HAS BEEN UNDER WATER OR EXPOSED TO MOISTURE CORROSION. IMMEDIATELY CALL A QUALlFlED SERVICE TECHNICIAN TO INSPECT THE HEATER AND REPLACE ANY PART OF THE CONTROL SYSTEM AND ANY GAS CONTROL WHICH HAS BEEN UNDER WATER.

RECOMMENDED GAS PIPE DIAMETER

PipeLength

Schedule40 Pipe

Tubing, Type L

(Feet)

InsideDiameter

OutsideDiameter

 

N.G.

L.P.

N.G.

L.P.

0-10

1/2"

3/8"

1/2"

3/8"

 

1.3 cm

1.0 cm

1.3 cm

1.0 cm

10-40

1/2"

1/2"

5/8"

1/2"

 

1.3 cm

1.3 cm

1.6 cm

1.3 cm

40-100

1/2"

1/2"

3/4"

1/2"

 

1.3 cm

1.3 cm

1.6 cm

1.3 cm

100-150

3/4"

1/2"

7/8"

3/4"

 

2.0 cm

1.3 cm

2.3 cm

2.0 cm

NOTE: NEVER USE PLASTIC PIPE. CHECK TO CONFIRM WHETHER YOUR LOCAL CODES ALLOW COPPER TUBING OR GALVANIZED PIPE.

A LABEL ON THE BURNER SYSTEM

MODULE STATES THE FUEL FOR

WHICH THE HEATER IS EQUIPPED.

Image 9
Contents Harman Conquest Gas Stove Safety NoticeFor Your Safety What to do if YOU Smell GAS Table of Contents Introduction4 Operation OPERATION5Pilot Flames OPERATION6Ratings Natural SPECIFICATIONS7Specifications Corner ClearancesAlcove Clearances Installation Use Only Approved Venting Part Numbers for SimpsonDura-Vent Pipe and Fittings8 x Description Rear Vent ConquestRequirements for Terminating the Venting INSTALLATION13 Damper SettingsFeet Changing to Natural Gas Natural Gas Conversion KitNatural Gas Kit INSTALLATION15 Log Placement INSTALLATION16Ember Placement Deflector plateTile Kit Installing TilesInstallation Options Connecting the Optional ThermostatRemote Control Kit Optional Blower Cleaning the Glass MaintenanceRemoving the Glass Front Replacing the GasketCleaning the Log Set and Firebox MAINTENANCE21Cleaning the Burners Inspecting the VentingMAINTENANCE22 Optional Blower WiringDiagram 120 Volt WHI # Model ConquestGlass gasket 7’/unit PartsBurner Parts MAINTENANCE25Bad YesReplace Piezo Ignitor Turn on gas valve Replenish supply ReplaceGood Trouble ShootingCheck inlet pressure Replace ValveIs Pilot lit BadOrifice Size Optional Blower Label11 WC Input Btu/h 27,500 Converted ByDateHarman Gold Warranty Harman Gold WarrantyYear Transferable Limited Warranty Residential Year Limited Warranty Commercial

Conquest Gas Stove specifications

The Harman Stove Company Conquest Gas Stove represents a pinnacle of design and technology in home heating solutions. This high-efficiency gas stove is engineered to deliver not only warmth but also aesthetics, making it an attractive addition to any living space.

One of the standout features of the Conquest Gas Stove is its advanced heating capability. With its large firebox, this stove can produce an impressive 44,000 BTUs, ensuring ample warmth for larger rooms or open-concept areas. The stove is designed to provide consistent heat over extended periods, creating a cozy atmosphere regardless of the outdoor temperature.

Efficiency is a key characteristic of the Conquest model, boasting an impressive efficiency rating of up to 85%. This means that more of the gas consumed is converted into usable heat, allowing homeowners to save on energy costs while enjoying a sustained warmth. The stove features a sealed combustion system that draws air from outside, providing a clean burn and enhancing energy efficiency.

The Harman Conquest Gas Stove is also equipped with innovative technology, including adjustable heat output and variable blower speeds that allow users to customize their heating needs. The easy-to-use digital control provides precise temperature adjustments, ensuring that the room temperature can be maintained at the desired level effortlessly.

Aesthetically, the Conquest Gas Stove is designed to fit seamlessly into various home decor styles. Its attractive cast iron body is available in multiple finishes, providing versatility to complement any interior. The large viewing window, framed by stylish cast iron, enhances the beauty of the flames, creating an enchanting visual centerpiece in any living area.

Safety is another critical aspect of the Conquest Gas Stove. It comes equipped with advanced safety features, including an automatic shut-off valve and a safety thermocouple that ensures the stove operates safely under all conditions.

In conclusion, the Harman Stove Company Conquest Gas Stove combines high efficiency, modern technology, and exquisite design to deliver a top-tier heating solution. With its robust output, customizability, aesthetic appeal, and safety features, the Conquest model exemplifies what homeowners can expect from a premium gas stove. It is a perfect choice for those looking to enhance their heating system while enjoying the timeless charm of traditional stove design.