Introduction4

The Harman Conquest Direct Vent Gas Stove is a listed gas-fired direct vent room fireplace tested by Intertek Testing Services/Warnock Hersey to ANSI Z21.88-2002, CSA 2.33-M02 and CANL/CGA- 2.17-M91.

The installation of the Conquest Direct Vent Gas Stove must conform with local codes, or in the

absence of local codes, with National Fuel Gas Code, ANSI Z223.1 — latest edition and CAN 1 B1-149.1

and .2 Installation Code.

Also for use in mobile (manufactured) homes after home is sited.

Mobile (manufactured) home installations must adhere to Title 24 CFR, Part 3280, or CSA Z240.4.

CAUTION: This appliance must be vented to the outside.

Installation and repair of the Conquest Direct Vent Gas Stove should be done by a qualified ser- vice person. The appliance should be inspected be- fore use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that controlcompartments, burn- ers, and circulating air passageways of the Conquest be kept clean.

Due to high temperatures, the Conquest Direct Vent Gas Stove should be located out of traffic and away from furniture and draperies.

Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition.

Young children should be carefully supervised when they are in the same room as the appliance.

Clothing or other flammable materials should not be placed on or near the appliance. Surveiller les enfants. Garder les vetements, les meubles, lessence ou autres liquides a vapeur inflammables lin de lappareil.

When operating your Harman Conquest Gas Stove, respect basic safety standards. Read these in- structions carefully before you attempt to operate the stove. Failure to do so may result in damage to property or personal injury and may void the prod- uct warranty.

Consult with your local building code agency and insurance representative before you begin your installation to ensure compliance with local codes, including the need for permits and follow-up inspec- tions.

Several issues must be addressed when select- ing a suitable location for your Conquest Gas Stove. Observing required clearances to combustible ma- terials, the proximity to a safe chimney or venting system location, and the accessibility of the gas and electrical supply must all be considered. In addition, selecting a location that takes advantage of the building's natural air flow is also desirable to maxi- mize the heating effectiveness of the stove. In many cases, this is a central location within the building.

Anysafety screen or guard removed for servicing an appliance must be replaced prior to operating the appliance.

This appliance may be installed in an after- market permanently located (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type(s) of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

Cet appareil peut etre installe dans un maison prefabriquee (mobile) deja installee a demeure si les reglements locaux le permettent.

Cet appareil doit etre utilise uniquement avec les types de gas indiques sur la plaque signaletique. Ne pas l utiliser avec d autres gas sauf si un kitde conversion dertifie est installe.

Conquest Gas Stove specifications

The Harman Stove Company Conquest Gas Stove represents a pinnacle of design and technology in home heating solutions. This high-efficiency gas stove is engineered to deliver not only warmth but also aesthetics, making it an attractive addition to any living space.

One of the standout features of the Conquest Gas Stove is its advanced heating capability. With its large firebox, this stove can produce an impressive 44,000 BTUs, ensuring ample warmth for larger rooms or open-concept areas. The stove is designed to provide consistent heat over extended periods, creating a cozy atmosphere regardless of the outdoor temperature.

Efficiency is a key characteristic of the Conquest model, boasting an impressive efficiency rating of up to 85%. This means that more of the gas consumed is converted into usable heat, allowing homeowners to save on energy costs while enjoying a sustained warmth. The stove features a sealed combustion system that draws air from outside, providing a clean burn and enhancing energy efficiency.

The Harman Conquest Gas Stove is also equipped with innovative technology, including adjustable heat output and variable blower speeds that allow users to customize their heating needs. The easy-to-use digital control provides precise temperature adjustments, ensuring that the room temperature can be maintained at the desired level effortlessly.

Aesthetically, the Conquest Gas Stove is designed to fit seamlessly into various home decor styles. Its attractive cast iron body is available in multiple finishes, providing versatility to complement any interior. The large viewing window, framed by stylish cast iron, enhances the beauty of the flames, creating an enchanting visual centerpiece in any living area.

Safety is another critical aspect of the Conquest Gas Stove. It comes equipped with advanced safety features, including an automatic shut-off valve and a safety thermocouple that ensures the stove operates safely under all conditions.

In conclusion, the Harman Stove Company Conquest Gas Stove combines high efficiency, modern technology, and exquisite design to deliver a top-tier heating solution. With its robust output, customizability, aesthetic appeal, and safety features, the Conquest model exemplifies what homeowners can expect from a premium gas stove. It is a perfect choice for those looking to enhance their heating system while enjoying the timeless charm of traditional stove design.