OPERATING YOUR HEATER (CONTINUED) PAGE 19
Adjusting the Blower Speed
+The blower helps transfer the heat from the heater into the room. It will not turn on until the heater is up to temperature (approximately 10 minutes after starting). See the illustration below for instructions on adjusting the blower speed.
PILOT | OFF | HI |
IGNITER |
| |
LO |
| |
|
|
BLOWER
Blower Knob
Turn the knob all the way
Normal Operating Sounds
Blower
This heater uses a blower to push heated air into the room. You will hear the sound of air movement that increases as the speed is increased.
Pilot Flame
The pilot flame, which remains on, makes a very slight "whisper" sound.
Gas Control Valve
As the gas control valve is turned on and off you will hear a dull clicking sound. This is the valve opening up and shutting down.
The appliance may creak with change of temperature.
Blower Snap Disk
This part can produce a clicking sound as it turns the blower on and off.