Avalon Stoves 700 B-VENT manual Optional Equipment, Orifice Identification

PAGE 32 OPTIONAL EQUIPMENT (CONTINUED)

4Follow the directions below to remove the natural gas orifice. Apply thread sealant to the LP orifice (#49 - it has "49" stamped on it) and tighten in place with a 1/2" open end wrench. Replace the spring. Slide the adjustable shutter back in place.

a	b
Push the adjustable shutter to the	Slide the adjustable shutter
left, off the orifice (be careful not	down, away from the orifice.
to bend the shutter linkage).
Adjustable
Shutter
Orifice

c

Remove the spring

Shutter Linkage

d

Use a 1/2Ó open end wrench to unscrew the orifice.

1/2" Wrench

ef

	The new LP orifice has
	Ò49Ó stamped on it.
	Apply thread
49	sealant to the
	new orifice

prior to installation.

The old NG orifice has Ò31Ó stamped on it.

31

5Re-attach the burner pan and burner box front to the burner pan box following the instructions in step 3 in reverse order.

6Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice. The propane conversion kit includes a .016Ó (labeled LP 16) or .011Ó (labeled LP 11) pilot orifice. The .016Ó orifice is preferred because it allows for greater pilot adjustment.

Remove the pilot

hood assembly by unscrewing the two attachment screws.

Phillips

Screwdriver

Pull the pilot orifice

retainer and pilot orifice

upwards to remove.

Pilot Hood

Assembly

Orifice Identification:

Pilot Orifice	LP (Propane) Orifices
Retainer		L		L
	1	1	1	6
		P		P
Pilot Orifice
			(preferred)
	NG (Natural Gas) Orifices
	1	8	2	1
		N		N

(preferred)