CANOPY HATCH INSTALLATION
Step 5. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 6. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Tighten the screws firmly by hand only,
Step 7. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or
CANOPY | TILT THE | |
FAN TO | ||
HATCH | ||
INSTALL | ||
| ||
| LAST | |
LOCK | CANOPY | |
SCREW | ||
WASHER | ||
| ||
CANOPY |
| |
SCREW |
|
BLADE & BLADE HOLDER HARDWARE
BLADE SCREW | BLADE | BLADE | |
(4 PER BLADE) | BADGE | ||
HOLDER | |||
|
| ||
BLADE HOLDER |
|
| |
SCREW |
|
| |
(2 PER BLADE) |
|
|
BLADE BADGE INSTALLATION
Step 8. Attach the blades to the blade holders by first pressing the blade badge into the blade, then installing the blade holder using the four blade screws and flat washers provided for each blade.
Using the screwdriver, tighten securely by hand only.
Repeat for each blade assembly.
BLADE
BADGE
BLADE | BLADE SCREW |
HOLDER | (4 PER BLADE) |
BLADE
BLADE ACCESS PLATE REMOVAL
Step 9. Remove the blade access plate next to the light fixture. Set aside the two screws and the
LIGHT
FIXTURE
BLADE ACCESS
PLATE
6