Inserting a Bobbin
z
x
Step z
Place a bobbin in the bobbin case making sure the thread winds clockwise on the bobbin as illustrated.
| Step x |
q | Draw the thread through the slit q in the bobbin case. |
| q Slit |
w
c | Step c |
| |
| Continue to pull the thread under the tension spring w |
| and through the opening e. |
e | Pull out about 4˝ of thread. |
| The bobbin should spin clockwise when the thread is pulled |
| out of the bobbin case. |
| w Tension spring |
| e Opening |
Inserting the Bobbin Case into the Hook
z
w |
|
|
|
e |
|
| Step z |
q |
|
| Holding the latch q open, position the bobbin case into the |
|
|
| hook aligning the slot w with the notch e. |
|
|
| The bobbin case should lock into place when the latch is |
t |
|
| released. |
|
| q Latch | |
|
|
| |
x | w |
| w Slot |
| e Notch | ||
|
|
| |
r |
| e | Step x |
| Close the bobbin case cover r and attach the bobbin case | ||
q |
|
| |
|
|
| cover plate t in this order. |
|
|
| r Bobbin case cover |
|
|
| t Bobbin case cover plate |
11