GETTING READY TO SEW
Connecting Machine to Power Supply
i
w
q
y
t
e
u
CAUTION
Always turn the power switch off and unplug the sewing machine from the electrical outlet when the machine is not in use.
qMachine power plug
wMachine socket for power supply plug e Power supply plug
r Wall outlet
t Machine socket for foot control
ry Foot control plug u Foot control
Steps To Turning Machine Power On
Turn off the power switch on the machine. Insert the foot control plug y into the machine socket t.
Insert the machine plug q into the machine socket w.
Insert the power supply plug e into the wall outlet r.
Turn on the power switch i.
Controlling Sewing Speed
Speed Control Lever
Use the speed control lever to set the maximum speed of the machine.
To increase sewing speed, slide it to the right. To decrease sewing speed, slide it to the left.
Foot Control
Sewing speed is varied by the foot control and the speed control lever. The heavier the foot presses down on the controller the faster the machine runs.
The machine runs at the maximum speed set by the speed control slider when the foot control is being fully depressed.
Operating Instructions:
The symbol "O" on a switch indicates the "off" position of a switch.
For appliances with a polarized plug (one blade wider than the other): To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
6