HOW TO SEW
Test Stitching
Thread
| q |
| Before starting your project always test the |
z | compatibility of thread, needle and fabric together. |
Also test stitch length and pressure foot pressure. | |
| Step z |
| Turn the stitch length adjustment dial q to |
| adjust the stitch length to 3. Raise the thread |
| take up lever and slide the needle and bobbin |
| threads under the presser foot. |
x | Step x |
| Turn the handwheel w toward you to lower the |
| needle into the fabric. |
w
c
vt
b
y
Step c
Lower the presser foot lifter e.
Set the speed control slider to a slower setting until you get used to the sewing speed.
Press the foot control r to start sewing.
e
r
Step v
| Check the sewing result and adjust the needle |
| thread tension t as necessary. |
| Step b |
| Press the auto thread cutter button y to trim |
| the threads. You can continue sewing without |
| pulling the bobbin thread up again through the |
u | needle plate. |
*Do not use the thread cutter u if the thread is heavier than #30.
17