Using the Built in Needle Threader
z
q
x
cw
e
Step z Lower the presser foot. Press the Up/Down needle button twice to raise the needle to its highest position. Turn the power switch off.
Push down the needle threader lever q as far as it will go.
Step x Turn the lever q in the direction of the arrow to insert the hook into the needle eye.
The hook r comes out through the needle eye as illustrated.
Step c Holding the thread with both hands, draw the thread along the thread path w.
Then hook the thread around the guide e.
v | Step v Draw the thread under the hook r. |
| Hold the end of thread with your hand while pulling |
| up the thread lightly in the direction of arrow. |
| r |
b | Step b Turn the lever in the direction of the arrow as |
| shown, drawing the thread loop t through the |
| needle. |
| Release the threader lever slowly. Then pull the |
| thread loop t to the right. |
t
13