Singer S16 Replacing the Light Bulb on the Underside of the Sewing Arm, To remove, To replace

Page 22

Replacing the Light Bulb

w

q

e

CAUTION

Turn the power off before replacing the light bulb. The bulb could be HOT, wait until it has cooled down before touching it.

qSetscrew w Face cover e Lamp socket r Light bulb

To remove:

Remove the setscrew q. Remove the face cover w.

Pull bulb straight down r from the lamp socket e.

To replace:

Insert a new bulb into the opening of the socket e. Attach the face cover w with the setscrew and cap.

Replace the bulb with the same type, rated 12 V, 5 W.

r

Replacing the Light Bulb on the Underside of the Sewing Arm

Lay the machine on its back.

q	Detach the lamp window q from the machine with the
q	screw driver as shown.
	Pull out the light bulb e from the socket.
	e
w	Insert a new bulb into the socket w.
	Attach the lamp window q into the opening on the
	machine.
	q Lamp window
	w Lamp socket

qe Light bulb

Replace the bulb with the same type, rated 12 V, 5 W.

22

Image 22

Contents S16 For Europe only For outside Europe except U.S.A and CanadaTable of Contents Machine Identification Name of PartsStandard Accessories Attatching Knee LifterGetting Ready to SEW Connecting Machine to Power SupplySteps To Turning Machine Power On Controlling Sewing Speed Speed Control LeverBobbin Winding Button Thread Cutter Button Stitch Length Adjustment DialUp/Down Needle Position Button Reverse Stitch LeverPresser Foot Pressure Dial Presser Foot LifterAttaching and Detaching Presser Foot Positioning thread spools Positioning Thread SpoolsTo remove the bobbin from the bobbin case Positioning thread on spool conesWinding a Bobbin Inserting a Bobbin Inserting the Bobbin Case into the HookThreading the Needle Thread Using the Built in Needle Threader Bringing Up Bobbin Thread Changing the Needle Thread and Needle ChartTo Check the Needle Adjusting Needle Thread Tension HOW to Balance Thread TensionsAdjusting Bobbin Thread Tension Balanced Needle Thread TensionHOW to SEW Test StitchingSecuring a Seam / Knotting the Threads Securing a Seam / Reverse StitchingPivoting a Corner Using Fabric Guide Narrow Hemming FootUsing the Darning / Embroidery Foot Using the Quarter Inch Foot with GuideCleaning the Hook and Feed Dog Area Care & MaintenanceOiling the Machine To remove Replacing the Light BulbReplacing the Light Bulb on the Underside of the Sewing Arm To replaceTroubleshooting Condition Cause Reference