OPERATION
•Place your fan on a level and dry surface.
•Plug the power cord into a polarized 120 Volt AC wall outlet.
•Adjust the height by loosening the Height Adjustment Knob and adjusting the fan up or down. Then tighten the Height Adjustment Knob.
•To operate the Child Resistant switch, depress the Speed Control Knob and turn to the desired position (Fig. 10).
•To activate or disengage the oscillation feature, push down or pull up on the Oscillation Control Knob (Fig. 11).
•Tilt the fan head to desired angle.
Fig. 10
PUSH IN
AND TURN
Fig. 11
OSCILLATION
CONTROL KNOB
CLEANING AND STORAGE
•Unplug the fan before cleaning.
•Use only a soft, damp cloth to gently wipe the fan clean.
•DO NOT immerse the fan in water and never allow water to drip into the motor housing.
•DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
REMOVAL OF THE FRONT GRILL FOR CLEANING
•Release the Front Grille clips from around the Rear Grille and remove the Front Grille.
•Unscrew the Blade Knob by turning it CLOCKWISE (reverse thread).
•Pull the Fan Blade away from the Motor Housing.
•Gently wipe the Fan Blade and Grilles.
•