Black & Decker BDWF7710 manual How to Use, Product may vary slightly from what is illustrated

Page 3

BDWF7710Pub1000001430 10/11/04 4:51 PM Page 4

Product may vary slightly from what is illustrated.

11

How to Use

This appliance is for household use.

IMPORTANT: During the first few minutes of initial use, a slight odor may be noticeable. This is normal and will quickly disappear.

INSTALLATION INSTRUCTIONS

1.Unpack twin window fan carefully.

2.This unit is designed for use in double-hung, casement and vertical slider-type windows with minimum openings of 23.5" (59.5 cm) wide and 11.2" (28.5 cm) high.

3.This fan is designed to be used (and recommended for use) with a screen in the window.

4.With the sliding portion of the window fully open, take an accurate inside measurement (left to right for double-hung type windows and top to bottom for vertical slider-type windows) of the window opening where the unit is to be placed.

For double-hung type windows

1.

With the window fully open, set the fan in the window with front of fan facing the

 

INSIDE.

2.

Hold fan with one hand while attaching/adjusting panels with the other. Attach one of

 

the panel inserts by sliding it down the groove located at the top left of fan. Before

 

closing window, pull open clamps located at top and bottom on right side on fan, and

† 1. Panel insert

(2 panel inserts per set Part #103409900592)

2.Groove

3.Digital control panel

4.Carry handle

5.Release clamp

6.Expandable panel

7.Twin motors

8.7" (18cm) reversible blades

9.Remote control storage

†10. Remote control

(Part #103530000021)

† 11. Optional feet

(2 optional feet per set, right Part #103409900583, left Part # 103409900584)

12.10' cord (25 cm)(not shown)

13.Screws (not shown)

†Consumer replaceable

 

adjust expandable panel, if necessary.

3.

Close the window on top of the fan with the bottom edge of the window behind the lip

 

of fan housing.

4.

If the fan still does not fit properly in the window, readjust the expandable panel on

 

right side of fan to fill in remaining space between panel and window frame until a

 

secure fit is achieved.

For vertical slider-type windows

1.

Position the fan in the window with the power switch facing the center of the opening.

2.

To adjust height, remove fan from window. If additional height required is 4" (10 cm)

 

or less, extend the expandable panel until it matches the height of the window. (For

 

example, if window height is 28" (71 cm), adjust panel so that the height of the fan is

 

also 28" (71 cm)). If fan height required is more than 28" (71 cm), attach one or both of

1. 3-Speed/On/Off button

2. Reverse buttons

3. Digital temperature display

4. Rainsafe™ button

5. Remote control sensor

6. Adjustable thermostat buttons

7. Temperature control button

B

A

3

 

the insert panels, as described in #2 of FOR DOUBLE-HUNG TYPE WINDOWS section

 

above.

3.

With the window fully open, position the fan in the window with the expandable panel

 

at the top and with power switch facing the center of the opening.

4.

Fan must fit securely against the inside edge of the window opening.

5.

Slide the sliding window to meet the edge of the fan. The side edge of the window must

 

fit securely behind the lip of fan housing.

6.

Adjust the expandable panel to fill in remaining space between fan and window frame.

Expandable panel locks into position by closing the clamps once fit is established.

OPERATING INSTRUCTIONS

1.

Plug into 120V AC electric outlet.

2.On/Off/SPEED— Press speed button to turn the fan on. Fan default direction when the unit is turned on is intake. Fan begins blowing at LOW speed, the corresponding LED speed indicator illuminates. To turn the fan off press the speed button through the cycle (LOW, MED, HI) until all speed lights are off.

3.Intake/Exhaust/Exchange — Both fans are automatically reversible and operate independently in either an intake or exhaust mode. The IN/OUT directional LED illuminates green for intake and red for exhaust.

To pull in fresh air from the outside – push reverse button to IN (green).

To remove stale or smoky air from the room - push reverse button to OUT (red). For air exchange –set one button to IN (green) and one button to OUT (red).

4

Page 2 Page 4
Image 3
Page 2 Page 4
Contents ?USA/Canada Mexico Model/Modelo/Modèle BDWF7710Important Safety Instructions Read and Save These InstructionsPolarized Plug 120V Models Only Operating Instructions How to UseProduct may vary slightly from what is illustrated Installation InstructionsFor Use As a Floor Or Table Fan Care and CleaningTo Use with the Remote Control CleaningEnchufe Polarizado Instrucciones Importantes DE SeguridadGuarde Estas Instrucciones POR Favor LEA Y Conserve Estas InstruccionesPara las ventanas verticales corredizas Como usarInstrucciones DE Montaje Para las ventanas de guillotinaModo DE Empleo Cuidado y limpiezaFiche Polarisée Modèles 120 V uniquement Importantes Mises EN GardeConserver CES Mesures Lire ET Conserver CES InstructionsFenêtres à guillotine à deux châssis mobiles UtilisationLe produit peut différer légèrement de celui illustré Instructions Relatives AU MontageEntretien et nettoyage Mode Demploi¿NECESITA AYUDA? Need HELP?Besoin D’AIDE? Guatemala 60 Hz, .45 a

BDWF7710 specifications

The Black & Decker BDWF7710 is a high-performance 7-in-1 multi-cooking appliance designed to make meal preparation efficient and versatile. With its sleek design and user-friendly interface, it caters to modern cooking needs while delivering reliable results.

One of the standout features of the BDWF7710 is its seven cooking functions, which include air frying, roasting, baking, broiling, toasting, reheating, and dehydrating. This multifunctionality allows users to prepare a wide range of dishes, from crispy fries to succulent roasts, all with the convenience of a single device. The air frying function, in particular, uses rapid air circulation technology to achieve a crispy texture while reducing the amount of oil used, promoting healthier eating habits.

The appliance boasts a spacious cooking capacity, accommodating up to 10 quarts, which is ideal for family meals or entertaining guests. Despite its large size, it maintains a compact design, making it suitable for kitchens of all dimensions. Additionally, the removable non-stick basket and tray make cleanup a breeze, allowing for a more enjoyable cooking experience.

Another key characteristic of the BDWF7710 is its intuitive digital control panel. The easy-to-read display allows users to adjust cooking time and temperature with precision. Pre-set cooking functions further simplify the process, enabling beginners and experienced cooks alike to achieve consistent results. The appliance also features a built-in timer and an automatic shut-off function for safety, ensuring peace of mind during cooking.

The BDWF7710 employs advanced heating technologies that ensure even cooking and eliminate hot spots. This feature not only improves the quality of the food prepared but also enhances the cooking speed, making meal preparation faster than traditional methods.

Durability is another hallmark of Black & Decker products, and the BDWF7710 is no exception. It is constructed from high-quality materials that can withstand frequent use while maintaining performance.

In conclusion, the Black & Decker BDWF7710 is a robust multi-cooker that combines versatility, efficiency, and safety. Its numerous cooking functions, user-friendly interface, and spacious capacity make it an excellent addition to any kitchen, catering to diverse culinary preferences while promoting healthier cooking practices. Whether you're a novice or a seasoned chef, the BDWF7710 can elevate your culinary creations and simplify your cooking routine.
Top Page Image Contents