Lawn Deck Adapter Installation
The following procedure includes the steps necessary for connecting the DR LEAF and LAWN VACUUM Blower Inlet Hose to your lawn tractor.
Tools Needed:
1/2" Wrench or Socket Drill with 3/8" Bit Saw
1.Install your lawn deck adapter (available from the manufacturer of your lawn tractor) on your lawn tractor.
Note: Optional Accessories – Due the variety of lawn tractors, the hose kits supplied may
not fit all tractors. Our Technical Service Dept. can help you adapt to your machine.
-A Universal Deck Adapter is available for you to fit to your machine if the tractor manufacturer’s lawn deck is not available.
-A Lawn Deck Adapter Extension is available to attach to a small deck adapter and support the vacuum hose.
1.Mark the distance of approximately 23" from the ground to the top surface of your lawn deck adapter exit tube (Figure 20).
2.Remove the lawn deck adapter from your lawn tractor and using a saw, cut the exit tube of the lawn deck adapter at 90° (Figure 20).
Figure 20
DR COMMERICAL LEAF and LAWN VACUUM Safety & Operating Instructions | 19 |