Hoover 4600 owner manual Changing filter bag, Headlight, Belt, How to replace

Page 11

3-1

3-2

 

A

 

B

Changing filter bag

3-3

C

Disconnect cleaner from electrical outlet.

Removing bag door

Pull bag door latch forward and remove door from cleaner. Grasp sides of bag collar and pull collar from tube.

Note: Do not clean out old bag and reuse. Discard used bag.

Installing filter bag

Align opening in new filter bag with dirt tube (A) inside bag compartment. Push bag collar (B) firmly onto dirt tube.

Tuck top and bottom of bag into bag com- partment.

Replacing bag door

To replace bag door, insert the tabs (C) on bottom of bag door into the slots on bag compartment.

Make sure all edges of paper bag are completely inside the bag compartment.

Close door.

The headlight

(some models only)

What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover Part

No. 27313-101.

3-4

How to replace

Disconnect cleaner from electrical outlet.

To remove hood, refer to Figs. 3-10 to 3-12.

3-5

Remove bulb by pulling straight out of socket; push new bulb into socket until it locks in place.

Place hood on cleaner body and press firmly to snap all four latches.

Pull up on hood slightly to make sure all four latches are secured.

Push nozzle control knob back onto front of cleaner.

The belt

The belt on your HOOVER cleaner caus- es the agitator to rotate and is important for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.

When to replace

To check belt, remove bottom plate as shown in “How to replace belt. Replace belt if it is stretched, cut or broken.

3-6

3-7

 

B

A

 

 

A

How to replace

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for Hoover part No. 40201190.

Removing bottom plate

Disconnect cleaner from electrical outlet.

Place handle in operating position and turn cleaner over so bottom side is up.

To remove bottom plate, insert end of flat screwdriver into wide area of right- hand slot (A) and push handle of screw- driver to the rear.

Repeat in left-hand slot (A).

Lift extension of bottom plate (B), rotate plate and remove from cleaner body.

Removing used belt

Remove agitator and broken agitator belt.

(If belt is not broken but is stretched or cut, proceed with Fig. 3-10 and pull belt off motor pulley. Then continue with Fig. 3-8.)

Continued

11

Image 11
Contents Review this manual before Operating cleaner Upright Vacuum CleanerIndex SaveFill in and retain Carton contents Assembling cleanerrAttach cord Handle assemblyDo not plug cleaner in until assembly is totally complete Compartment Attach handleAttach tool rack Attach bagAttach hose and tools Attach filter bagCleaner description How to userHandle positions Transporting cleanerAdjustment Low Setting 1 for bare floorsCleaning tools Cleaning lightweight rugsEdge cleaning Stair cleaningBag To clean toolsAttach wand and tools Clearing obstructionsBelt How to replaceChanging filter bag HeadlightPositioning belt onto pulley Positioning belt and agitatorReplacing bottom plate Removing hoodHoover part No LubricationWhat to buy Full One Year Warranty Domestic Use ServiceHoover Cleaning Performance ¡Guarde este folleto Manual del propietarioÍndice ¡Guarde estas instruccionesConecte el cordón Ensamblado de la aspiradoraContenido de la caja Ensamblado del mangoCómo usar la aspiradora Accesorios de limpieza Ajuste de la altura para limpiar alfombrasLimpieza de los bordes Limpieza de escalerasMantenimiento El agitador La luz delanteraCómo reemplazarla La correaServicio Si tiene un problemaLubricación Uso doméstico Garantía de un año CompletoPage Français p Guide de l’utilisateurÉconomisez Index Rangez et conservez ces instructionsMise en place du cordon AssemblageContenu de l’emballage Montage du mancheUtilisation Réglage de la hauteur Accessoires de nettoyagePositions du manche Transport de l’aspirateurEntretien Quel agitateur acheter ? Remplacement des balaisCourroie Comment remplacer la courroie ?Performance de nettoyage Hoover Service autoriséDépannage LubrificationUtilisation domestique Garantie complète De un anPage Hoover y Son marcas registradas Hoover et

4600 specifications

The Hoover 4600 is a standout vacuum cleaner, designed to deliver powerful cleaning performance combined with user-friendly features that cater to a variety of cleaning needs. This versatile machine emphasizes efficiency, making it an excellent choice for homes with both hard floors and carpets.

One of the key features of the Hoover 4600 is its advanced suction technology. Equipped with a robust motor, the vacuum provides deep cleaning capabilities, lifting dirt and debris from carpets while effectively cleaning hard surfaces. The multi-cyclonic filtration system plays a crucial role in maintaining suction power by separating larger particles from finer dust, ensuring that the vacuum continues to perform optimally even as the dirt container fills.

The design of the Hoover 4600 also prioritizes user convenience. It features a lightweight construction that allows for easy maneuverability around furniture and tight spaces, reducing user fatigue during extended cleaning sessions. The swivel steering enhances its agility, making it simple to navigate corners and obstacles in your home.

Another notable characteristic is the vacuum’s extensive range of attachments, including a crevice tool, upholstery brush, and a dusting brush. These specialized tools enable users to customize their cleaning approach, effectively addressing varied surfaces and hard-to-reach areas. This level of versatility ensures that the Hoover 4600 is capable of tackling everything from carpets to delicate furniture upholstery.

The vacuum also incorporates a HEPA filtration system, trapping 99.97% of dust and allergens. This makes it particularly beneficial for allergy sufferers or homes with pets, helping to improve air quality as you vacuum. In addition, the easy-to-empty dust bin reduces mess and hassle, allowing users to dispose of dirt quickly and efficiently.

Another feature that enhances user experience is the cord rewind function, which eliminates the need to manually wrap up the cord after use. This simple addition makes storage hassle-free, ensuring that the vacuum is ready for the next cleaning session with minimal effort.

In summary, the Hoover 4600 combines powerful suction technology, a lightweight design, versatile attachments, and advanced filtration systems to create an efficient cleaning solution. Whether tackling pet hair, dust, or allergens, this vacuum cleaner offers the performance and convenience needed to maintain a spotless home with ease.