Hoover Self-Propelled Powered Hand Tool manual Powered hand tool, Replacing brush roll

Page 11

3-15

D

Replacing brush roll

Removing brush roll

Slide Brush Roll Control (Fig. 2-9) to “Hard” (OFF) position.

Turn cleaner over and remove bottom plate (Fig. 3-9).

Lift up brush roll and slide V-belt (D) off brush roll.

3-16

E

C

Inspecting V-belt

The V-belt is designed to last for a long time and is not normally replaced. However, if V-belt is cracked, gouged or broken, now is a good time to replace it as follows.

Slide flat belt off large pulley as shown in Fig. 3-10.

To remove V-belt, slide back of belt over pulley (C). Then firmly pull on belt and “snap” it out.

Discard used belt. Replace with HOOVER part No. 38528034.

To install new belt (with lettering on out- side of belt), slide back of belt over pulley and pull front of belt toward groove (E) next to pulley.

Belt will “pop” into place.

3-17

F

Positioning belt on brush roll

Before positioning belt onto brush roll, check for debris accumulation as described in Fig. 4-2.

Insert brush roll through belt and posi- tion belt in groove (F) on brush roll.

3-18

G

H

 

Powered hand tool

Agitator brush roll replacement

When agitator brush roll brushes are worn, the brush roll should be replaced. Ask for HOOVER part No. 48414088.

3-19

A

How to replace

1.Remove tool from hose and turn it so bottom faces up. Press the latches on either side of tool and remove bottom plate (A).

Installing brush roll

Grasp brush roll and fit it into position by

first sliding end, opposite the belt, into the rectangular slot (G) on side of clean- er.

Push other side of brush roll (H) into place. Belt may fit loosely when proper- ly installed.

Reposition flat belt and bottom plate (Figs. 3-12 and 3-13).

3-20

B

2.Unscrew the two Phillips screws and remove belt guard (B).

3-21

C

D

C

3.Remove agitator including end plates

(C) and discard.

4.Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see follow- ing section).

5.Insert brush roll through belt and posi- tion belt over gear teeth (D) on brush roll.

Continued

 

11

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents This product was designed for easy Assembly See English pp.1-14 Review this manual before Operating cleanerFill in and retain Index Carton contentsOperations Step I Attach handleTransporting cleaner Cleaner descriptionON-OFF Switch Self-propel featureBrush roll control Carrying cleanerCarpet height adjustment Handle positionsCleaning tools Maintenance Secondary and final filters Headlight replacementReplacing flat belt Belt replacementBrush roll replacement Replacing brush roll Powered hand toolAgitator brush roll replacement Thermal protector Edge groomer replacementLubrication Clearing blockages ServiceHoover Cleaning Performance Trouble shootingChecking under bottom plate Full Two Year WarrantyIf blockage occurs during powered hand tool use Domestic UseEspañol pág Manual del usuarioAnote y guarde Lea este manual antes de Usar la aspiradoraContenido de la caja IndiceCómo ensamblar la aspiradora Cómo usar4Para trasladar 5Para transportar2Interruptor de encender-apagar 3Mecanismo de autopropulsiónMantenimiento Reemplazo de las correas Filtros secundario y finalReemplazo del foco delantero Accesorio de mano turboaccionado Reemplazo del rodillo de escobillasRendimiento de Reemplazo del limpiaorillasLubricación Servicio2Comprobación debajo de la place inferior Localizacion de averiasDesatascamiento de obstrucciones 1Inspección del paso de aireUso doméstico Garantía completa por dos añosPage Lire ce manuel avant dutiliser laspirateur Manuel de lutilisateurRemplir et à conserver Contenu de la caisse Mode d’emploiAssemblage de l’aspirateur 1Description de l’aspirateur3Fonction d’auto- propulsion 4Déplacement de l’aspirateur9Commande d’ agitateur 2Commutateur ON- OFF marche-arrêtEntretien Le filtre secondaire et le filtre final Remplacement de la courroie5Remplacement du filtre final Remplacement du phareAccessoire portatif à turbine Remplacement de l’agitateurDépannage 2Vérification sous la Plaque inférieure Garantie de deux ansDébouchages 1Inspection du passage de l’air

Self-Propelled Powered Hand Tool specifications

The Hoover Self-Propelled Powered Hand Tool represents a major advancement in cleaning technology, designed to make home maintenance easier and more efficient. This innovative tool effectively merges user-friendly features with robust functionality, making it a must-have for both everyday cleaning tasks and more challenging jobs.

One of the standout characteristics of the Hoover Self-Propelled tool is its self-propelling technology. This unique feature allows the tool to move forward with minimal effort from the user. By harnessing the power of motorized assistance, cleaning becomes less physically taxing. Whether tackling carpets or hard floors, users can enjoy reduced fatigue and improved maneuverability, making cleaning a quicker, less strenuous process.

In addition to its self-propelling capability, the Hoover tool is equipped with a range of specialized cleaning modes. These modes can be easily switched depending on the surface type, allowing for optimal dirt removal across various flooring materials. For instance, the brush roll can automatically adjust its height to meet the specific demands of carpeted areas, while a gentle suction setting can be utilized for delicate surfaces such as upholstery or curtains.

The Hoover Self-Propelled Hand Tool also boasts advanced filtration technologies, crucial for maintaining a healthy living environment. With a high-efficiency particulate air (HEPA) filter, this tool captures fine particles and allergens, ensuring that the air remains clean as you clean your home. This feature is particularly beneficial for allergy sufferers, who can breathe easier knowing that indoor air quality is significantly improved.

Durability is another important characteristic of the Hoover Self-Propelled tool. Constructed from high-quality materials, it is designed to withstand regular use while still maintaining peak performance. Its ergonomic design not only enhances usability but also ensures comfort during extended cleaning sessions.

Additionally, the tool comes with a variety of attachments, further enhancing its versatility. From specialized brush heads for pet hair removal to crevice tools for tight spaces, these attachments broaden the cleaning capabilities of the Hoover tool, making it suitable for a wide range of applications beyond mere floor cleaning.

In summary, the Hoover Self-Propelled Powered Hand Tool embodies a perfect blend of innovative technology, user-centric design, and superior cleaning efficiency. Its self-propelling feature, adaptable cleaning modes, advanced filtration system, and robust construction make it an essential tool for maintaining a spotless home with minimal effort.
Top Page Image Contents