Black & Decker ORB4810-CA instruction manual

Page 6

Emptying• Hold the appliancethe applianceso that the(Figuredust collectorF) cover (6) is facing upwards.

• Press the cover release button (7) the dust collector cover (6) will open.

• While holding the appliance over a bin or sink, lift out the filter (12) and empty the contents of the appliance.

• Replace the filter.

• Close the dust collector cover (6).

Note: The filters are re-usable and should be cleaned regularly.

F

WARNING:Never use the

a pliance without the filters. OptimumProjectile/Respiratorydust collection willHazard:only be achieved with clean filters.

Cleaning• Regularlythecleanappliancethe ventilation slots in your appliance using a soft brush or dry cloth.

• Regularly clean the outside of your appliance using a damp cloth. Do not use any abrasive or solvent-based cleaner.

• The inside of the dust bowl can be cleaned using a soft brush or dry cloth. Cleaning• The filtersthecan filterscleaned using a soft brush or dry cloth.

• The filters can be washed in warm soapy water.

• Make sure that the filters are dry before re-fitting.

ReplacingThe filters shouldthebefiltersreplaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer.

Visit www.blackanddecker.com to locate dealers.

• Remove the old filters as described above.

• Fit the new filters as described above.

MaintenanceThe filter can be washed thoroughly; however, use only mild soap and a damp cloth to clean the main part of the vacuum.

To assure product SAFETY and RELIABILITY,repairs, maintenanceand adjustmentIMPORTANT:(other than those listed in this manual) should be performed by authorized servicecentersor otherqualified servicepersonnel,alwaysusingidentical replacement parts.

IfTroubleshootingthe product does not work, check the following:

• The charge indicator light is on when unit is connected to charger.

• The charger was correctly plugged in for recharge. (It feels slightly warm to the touch.)

• The charger cord is not damaged and is correctly attached.

• The charger is plugged into a working electrical outlet.

• The switch is in the “OFF” position when charging.

For assistance with your product, visit our websitefor the location of the service center nearest you or call thewwwBLACK.blackanddecker& DECKER help.comline at

1-800-544-6986.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Cordless Hand VAC Important Safeguards Symbols Attaching the accessory caddy Figure aSwitch ng on and off fig. E Charging the battery Figure CTo close the appliance Reset To open the appliance Figure DPage Page See ‘Tools-Electric’ Yellow Pages For Service & Sales MODESANSDʼEMPLOIFIL Avertissement Symboles Conserver CES DirectivesCaractéristiques DU Produit Poignée et la buse figure D Pour ouvrir l’appareil figure DPour fermer l’appareil réinitialiser la Allumer et éteindre l’appa eil fig. EAvertissement Risque de projectiles et danger Page Un usage commercial.si les étiquettes Manual DE Instrucciones Advertencia Conserve Este Manual Instalación del portaaccesorios Instalación de los accesoriosCarga de la batería Figura C Para abrir el aparato Figura DEncendido y ap gad Advertencia Page Page Product Infomation · Identificación DEL Producto Solamente Para Propositos DE Mexico Page Cat No. ORB4810-CA

ORB4810-CA specifications

The Black & Decker ORB4810-CA is a versatile and powerful floor sander designed to make the task of refinishing hardwood floors effortless. This tool combines functionality with ease of use, catering to both DIY enthusiasts and professional users.

One of the standout features of the ORB4810-CA is its powerful 3.4 amp motor that delivers ample power for even the toughest sanding jobs. The sander operates at a variable speed of up to 4000 RPM, allowing users to choose the ideal speed for different surfaces. This feature is particularly useful when working on different types of wood or when transitioning between sanding and finishing.

Another significant characteristic is the design of the sanding pad. The ORB4810-CA features a 5-inch random orbit sanding pad that ensures a swirl-free finish. This design minimizes the risk of sanding marks, providing smooth surfaces ready for staining or sealing. Additionally, the hook-and-loop system for attaching sandpaper provides quick and convenient changes, keeping productivity high.

The sander is also equipped with an innovative dust collection system, helping to maintain a clean work area by capturing dust and debris. The integrated vacuum bag effectively collects particles, reducing the need for post-sanding cleanup. This is particularly important for users who wish to limit dust exposure and maintain air quality during their work.

Comfort is crucial when it comes to power tools, and the ORB4810-CA does not disappoint. It features an ergonomic grip designed for extended use without causing fatigue. The compact and lightweight design makes it easy to maneuver and reduces strain on the user, allowing for more prolonged periods of sanding.

In terms of versatility, the Black & Decker ORB4810-CA can be used on a variety of surfaces, including hardwood, laminate, and even some metal finishes. This adaptability makes it an excellent choice for a myriad of projects, whether it's refinishing an old piece of furniture or preparing floors for new finishes.

In summary, the Black & Decker ORB4810-CA floor sander merges power, efficiency, and user-friendly design in a compact body. With its strong motor, versatile sanding pad, effective dust collection system, and comfortable grip, it stands out as a reliable tool for both amateurs and professionals seeking a quality sanding experience. With the ORB4810-CA in hand, users can tackle their sanding projects with confidence and achieve impressive results.
Top Page Image Contents