Billy Goat MV650SPH owner manual Operation

Page 12

MV650SPH Self-Propelled Vacuum Owner’s Manual

OPERATION

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves, or other combustible material near the muffler.

DO NOT touch muffler, cylinder or cooling fins while engine is running. Contact with hot surfaces may cause severe burns.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT operate equipment with guards removed.

DO NOT operate equipment in areas containing rock, glass, string-like material, wire, rags, cans, metal, or other non-organic material.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT allow children to operate this equipment.

ALWAYS keep hands and feet away from moving or rotating parts.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

Part No 840099

12

Form No 082206A

Image 12
Contents Billy Goat MV650SPH Self-Propelled Vacuum Contents About this ManualMV 650 Series Specifications Common Replacement PartsSerial Plate Data General Safety Instructions and Symbols Form No F082206A Sound Data Vibration DataIntended USE Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator Controls StartingVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGHandling and Transporting StorageMaintenance Periodic MaintenanceLocation Drive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Nozzle Assembly Parts List Part MV650SPH Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH Number Description QTYHood Assembly Hood Assembly Part V650SPH NUM BER Description QTYForm No 082206A