Billy Goat MV650SPH owner manual Sound Data, Vibration Data, Intended USE

Page 6

MV650SPH Self-Propelled Vacuum Owner’s Manual

SOUND DATA

SOUND LEVEL 103 Dba at Operator Position

Sound tests were conducted in accordance with 2000/14/EC as well as ISO11094, and were performed on 5-17- 2005 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:

Sunny

Temperature:

66.2oF (19oC)

Wind Speed:

8.5 mph (13.7kph)

Wind Direction:

South Southwest

Humidity:

59%

Barometric Pressure:

29.9” Hg (101.35kPa)

VIBRATION DATA

VIBRATION LEVEL 1.43g(14.00m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 5-24-2006 under the conditions listed below.

General Conditions:

Sunny

Temperature:

73.7oF (23.2oC)

Wind Speed:

8.05 mph (3.6m/s)

Wind Direction:

South

Humidity:

83.5%

Barometric Pressure:

29.91” Hg (101.31 kPa)

INTENDED USE

Your BILLY GOAT ® MV Vacuum is designed for vacuuming leaves, grass clippings, and other types of organic litter, as well as, debris mixed with cans, bottles, and small amounts of sand; however, vacuuming cans, bottles and sand will affect the longevity of your machine.

Like all mechanical tools, reasonable care must be used when operating the machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 25).

Part No 840099

6

Form No 082206A

Image 6
Contents Billy Goat MV650SPH Self-Propelled Vacuum Contents About this ManualMV 650 Series Specifications Common Replacement PartsSerial Plate Data General Safety Instructions and Symbols Form No F082206A Sound Data Vibration DataIntended USE Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator Controls StartingVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGHandling and Transporting StorageMaintenance Periodic MaintenanceLocation Drive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Nozzle Assembly Parts List Part MV650SPH Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH Number Description QTYHood Assembly Hood Assembly Part V650SPH NUM BER Description QTYForm No 082206A