Billy Goat MV650SPH owner manual Vacuum Nozzle Height Adjustment

Page 14

MV650SPH Self-Propelled Vacuum Owner’s Manual

3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine.

SECURE UNIT AT THE HANDLE WITH LEFT HAND DURING START

PULL ROPE STARTER WITH RIGHT HAND

PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback.

4. Move throttle control back to FAST position and allow engine to reach correct operating speed.

VACUUM NOZZLE HEIGHT ADJUSTMENT

FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into the

nozzle. NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank handle clockwise and counter-clockwise.

Part No 840099

14

Form No 082206A

Image 14

Contents Billy Goat MV650SPH Self-Propelled Vacuum Contents About this ManualSerial Plate Data MV 650 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols Form No F082206A Intended USE Sound DataVibration Data Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator Controls StartingVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGHandling and Transporting StorageLocation MaintenancePeriodic Maintenance Drive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Nozzle Assembly Parts List Part MV650SPH Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH Number Description QTYHood Assembly Hood Assembly Part V650SPH NUM BER Description QTYForm No 082206A