Billy Goat MV650SPH owner manual Form No F082206A

Page 5

MV650SPH Self-Propelled Vacuum Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT start equipment with drive clutch engaged.

DO NOT operate equipment with guards removed.

DO NOT operate equipment in areas containing rock, glass, string-like material, wire, rags, cans, metal or other non-organic material.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT allow children to operate this equipment.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.

ALWAYS keep hands and feet away from moving or rotating parts. ALWAYS store fuel in approved safety containers.

Form No F082206A

5

Part No 840099

Image 5
Contents Billy Goat MV650SPH Self-Propelled Vacuum About this Manual ContentsSerial Plate Data MV 650 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols Form No F082206A Intended USE Sound DataVibration Data Engine Labels Instruction LabelsMV Vacuum Assembly Drawing Parts List 1st Assembly InstructionsHere Operation Starting Operator ControlsVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Shut Down Vacuuming OperationDebris BAG Clearing a Clogged NozzleStorage Handling and TransportingLocation MaintenancePeriodic Maintenance Impeller Removal Drive Clutch Cable AdjustmentReconnect Spark Plug Drive Belt Removal and ReplacementImproper Chain Tension Installing NEW Drive CHAIN/ALIGNMENT/TENSIONWiring Diagrams TroubleshootingWarranty Claim Procedure Engine Maintenance and RepairMaintenance Record Illustrated Parts List Part MV650SPH Item no Number Description QTY Nozzle Assembly Parts ListDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Part MV650SPH Number Description QTY Engine Assembly Parts ListHood Assembly Part V650SPH NUM BER Description QTY Hood AssemblyForm No 082206A