Billy Goat MV650SPH owner manual Clearing a Clogged Nozzle, Debris BAG

Page 17

MV650SPH Self-Propelled Vacuum Owner’s Manual

CLEARING A CLOGGED NOZZLE

DISCONNECT spark plug wire before servicing unit.

1.Shut engine off and wait for impeller to stop completely.

2.Disconnect spark plug wire.

3.Wearing durable gloves, remove clog.

WEAR durable gloves. Clog may contain sharp materials.

4. Reconnect spark plug wire.

DEBRIS BAG

Debris bags are normal replaceable wear items.

Frequently empty debris to prevent bag overloading with more weight than you can lift.

Bag liners are available for use in various conditions where debris will be vacuumed. (see Bag Liner Options shown on page 1).

DO NOT place bag on or near hot surface, such as engine.

Be sure engine has come to a complete stop before removing or emptying bag!!.

This vacuum is designed for picking up trash, organic material and other similar debris (see Safety Warnings page 4-5).

Many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas. However, following these rules will help maintain your machine's ability to vacuum in dusty conditions:

•Run machine at idle to quarter throttle.

•Machine or pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry before use.

Having one or more spare Felt Filter (840194) is a good way to reduce down time while dirty bags are being cleaned.

Form No F082206A

17

Part No 840099

Image 17
Contents Billy Goat MV650SPH Self-Propelled Vacuum About this Manual ContentsSerial Plate Data MV 650 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols Form No F082206A Intended USE Sound DataVibration Data Engine Labels Instruction LabelsMV Vacuum Assembly Drawing Parts List 1st Assembly InstructionsHere Operation Starting Operator ControlsVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Shut Down Vacuuming OperationDebris BAG Clearing a Clogged NozzleStorage Handling and TransportingLocation MaintenancePeriodic Maintenance Impeller Removal Drive Clutch Cable AdjustmentReconnect Spark Plug Drive Belt Removal and ReplacementImproper Chain Tension Installing NEW Drive CHAIN/ALIGNMENT/TENSIONWiring Diagrams TroubleshootingWarranty Claim Procedure Engine Maintenance and RepairMaintenance Record Illustrated Parts List Part MV650SPH Item no Number Description QTY Nozzle Assembly Parts ListDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Part MV650SPH Number Description QTY Engine Assembly Parts ListHood Assembly Part V650SPH NUM BER Description QTY Hood AssemblyForm No 082206A