Billy Goat MV650SPH owner manual General Safety Instructions and Symbols

Page 4

MV650SPH Self-Propelled Vacuum Owner’s Manual

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment.

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ® MV Vacuum.

This symbol indicates the engine oil level should be checked before operating this equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment:

READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison.

Part No 840099

4

Form No 082206A

Image 4
Contents Billy Goat MV650SPH Self-Propelled Vacuum Contents About this ManualCommon Replacement Parts MV 650 Series SpecificationsSerial Plate Data General Safety Instructions and Symbols Form No F082206A Vibration Data Sound DataIntended USE Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator Controls StartingVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGHandling and Transporting StoragePeriodic Maintenance MaintenanceLocation Drive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Nozzle Assembly Parts List Part MV650SPH Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH Number Description QTYHood Assembly Hood Assembly Part V650SPH NUM BER Description QTYForm No 082206A