Desa SMS18, SMS24 Cleaning Maintenance, Service Hints, Technical Service, Replacement Parts

Page 10

CLEANING AND

MAINTENANCE

Keep the area around the log set clean and clear of debris.

Occasionally, you may use a soft bristle brush to clean logs.

Once every year a qualified agency or certified chimney sweep should examine and clean the venting system of the fireplace.

SERVICE HINTS

When Gas Pressure is Too Low

pilot will not stay lit

burners will have delayed ignition

appliance will not produce specified heat

propane/LP gas supply may be low

You may feel your gas pressure is too low. If so, con- tact your local propane/LP or natural gas supplier.

TECHNICAL SERVICE

You may have further questions about installation, operation, or troubleshooting. If so, contact DESAʼs Technical Service Department at 1-866-672-6040. When calling please have your model and serial numbers of your appliance ready.

You can also visit DESAʼs technical services web site at www.desatech.com.

REPLACEMENT PARTS

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they canʼt supply original replacement part(s), call DESAʼs Technical Service Department at 1-866-672-6040. When calling DESA, have ready

your name and address

model and serial numbers of your log set

how log set was malfunctioning

type of gas used (propane/LP or natural gas)

purchase date

Usually, we will ask you to return the part to the factory.

PARTS NOT UNDER WARRANTY

Contact authorized dealers of this product. If they canʼt supply original replacement part(s), call DESA at 1-866-672-6040 for referral information. When calling DESA, have ready

model number of your log set

the replacement part number

10

www.desatech.com

117536-01B

Image 10
Contents What to do if YOU Smell GAS Models SMS18 and SMS24Table of Contents Safety Information Local Codes Product IdentificationUnpacking Venting Specifications for Installation InstallationFlue Opening Specifications Check GAS TypeInstallation Items Needed Installing Damper ClampConnecting to GAS Supply Masonry FireplaceChecking GAS Connections Hearth KIT Assembly and InstallationKit Assembly Ramp Pan Burner Test Pressures In Excess Of 1/2 Psig 3.5 kPaInstalling the Grate and Logs Optional GA9200 Series ON/OFF Safety VALVE/PILOT KITTesting Burner for Leaks Adding PAN MaterialLighting Instructions For Your Safety Read Before LightingOperating Appliance GAS Shutoff Valve OperationTechnical Service Cleaning MaintenanceService Hints Replacement PartsTroubleshooting Observed Problem Possible Cause RemedyGas leak. See Warning Manual Control ON/OFF Safety VALVE/PILOT KIT GA9200 AccessoriesEquipment Shutoff Valve GA5010 Illustrated Parts Breakdown Parts List Keep this Warranty Warranty InformationLimited Lifetime Warranty Vented GAS Logs