Desa PROPANE GAS LOG HEATER installation manual Installing Rear Log #3

Page 20

20

INSTALLING

Continued

3.Slide the grooves in the back of the rear log (#3) against the rear grate prongs. Make sure the peg on the log is on top (see Figure 19).

	Peg
Groove in	Rear Log (#3)
Back of Log

Grate Prong
Rear Burner	Groove in
	Back of Log

Grate Prong

Figure 19 - Installing Rear Log (#3)

4.Place the top middle log (#4) on the bottom middle log (#2). Make sure the pegs of the bottom middle log fit securely in the holes of the top middle log (see Figure 20).

Top Middle Log (#4)

Hole

Hole

Peg

Peg

Bottom

Middle Log

Figure 20 - Installing Top Log (#4)

102318

Image 20

Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information 001 Local Codes Unpacking Product Features Safety DeviceOperation Piezo Ignition SystemAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Unconfined SpaceDetermining AIR Flow for Heater Location Determining if You Have a Confined or Unconfined SpaceVentilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building High traffic areas Windy or drafty areas InstallingCheck GAS Type Minimum Wall and Ceiling Clearances see Figure Minimum Fireplace Clearance To Combustible MaterialsLOG Sizing Requirements Minimum Non Combustible Material Clearances If Using Mantel Floor Clearances Installing Damper Clamp Accessory for Vented Operation Attaching Damper ClampInstalling Heater Base Assembly Installation Items NeededConnecting to GAS Supply Attaching Mounting Brackets to HeaterExternal Regulator With Vent Pointing Down Pressure Testing gas Supply Piping system Checking GAS ConnectionsPressure Testing Heater Gas Connections Test Pressures Equal To or Less Than 1/2 PsigInstalling Logs Notch Front Log #1R Grate Prongs Metal Grate BarInstalling Rear Log #3 Installing Crossover Log #5 Operating Heater Operating Heater To Turn OFF GAS to ApplianceFront Burner Flame Pattern Inspecting BurnersPilot Flame Pattern Cleaning and Maintenance Trouble Shooting Turn off heater and let cool before cleaningODS/PILOT and Burners LogsCleaning and Mainte TROUBLE- ShootingRefer to Air for Com Trouble Shooting Statement at topTechnical Service Service HintsParts Not Under Warranty Replacement PartsParts Under Warranty Accessories Valve GA5010Hood GA6050 Hood GA6052Illustrated Parts Breakdown Parts List KEY Part Number Description QTY102318 102318 Warranty Information Keep this Warranty