Genie 3511035556 manual Slide collar

MAIN ASSEMBLY

•Slide a collar [11] over exposed end of screw on “middle” rail as far as it will go.

Fig. 1-8.

12 • Engage “hook” on “middle” rail with “hook” on “first” rail sectionFig. . 1-9.

•Slide collar toward power head so that it now covers hooks. Fig. 1-10.

•Snap a clip [12] onto screw behind collar to hold collar in place. Fig. 1-11.

•Slide middle rail against first rail.

•Place rail clamp [7] on each side of joint where rails meet. Match up holes in clamps with holes in rail. (Edge with lip is bottom of clamp.)

•Secure rail clamps with 4 bolts [8] and 4 nuts [9], hand tight only. Fig. 1-12.

FOR HELP-1.800.354.3643 OR GENIECOMPANY.COM

slide collar

Fig. 1-8

[11]

Collar

[12]

Clip

[9]

5/16" Flange nut

[8]

5/16" Shoulder bolt w/flange

Fig. 1-9

slide collar

Fig. 1-10

clip

Fig. 1-11

rail clamp

Fig. 1-12