Genie 3511035556 manual Sect 6-CONNECTING Power, With Grounded Plug, Connect Power with Plug

Page 26

SECT 6—CONNECTING POWER

WITH GROUNDED PLUG:

 

 

WARNING

 

 

To reduce the risk of electrical shock, this

26

 

equipment has a grounded type plug that

 

includes a third (grounding) pin. This plug will

 

 

only fit a grounded type outlet. If you do not

 

 

 

have a grounded outlet, contact a qualified

 

 

electrician to install one. DO NOT alter the plug

 

 

in any way. The door operator must be properly

 

 

grounded in order to prevent personal injury

 

 

and damage to the components.

 

 

 

1.Check local building codes.

•Does building code require permanent wiring?

–If not, skip to step 9.

–If yes, have an electrician perform steps 2 through 8.

CONNECT POWER WITH PERMANENT WIRING

Instructions for electrician.

2.Remove power from circuit.

3.Remove motor cover (Fig. 6-1).

•Remove 4 screws [41] from cover and slide off back of power head.

4.Remove and discard power cord.

•Cut off power cord inside power head.

NOTE: There must be at least 6 inches of black and white wire inside the power head (Between splice and entrance bushing).

•Remove and throw away power cord, strain relief and knock-out.

5.Install suitable entrance bushing.

6.Connect permanent wiring to power head wires.

•Connect white supply line to white wire.

•Connect black supply line to black wire.

•Connect ground to green wire (ground).

NOTE: Use only U.L. recognized wire nuts

7.Replace motor cover.

•Slide motor cover back on.

•Replace and tighten 4 screws.

8.Reconnect power to circuit.

CONNECT POWER WITH PLUG

9.Plug in door operator.

•See warning above.

•Plug door operator into a grounded outlet.

•Perform STB® alignment check (Fig. 6-2).

FOR HELP-1.800.354.3643 OR GENIECOMPANY.COM

screws

Fig. 6-1

Safe-T-Beam®Alignment Check

After turning the electrical power on, if the STBs are not in proper alignment, the red LED (Source) will blink continuously.

To correct the problem – the brackets are flexible and can be adjusted slightly to bring the system into alignment.

When the STBs are in alignment the red LED will stop blinking and stay on.

Fig. 6-2

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Series IS, ISL, IC, H HomeLink is a universal transceiver a combined Check your ceiling where the powerHead of your new unit will be mounted Typical 1-PIECE Door Installation Table of Contents Power Head Parts List Operational FeaturesParts List Piece Rail Hardware Exploded ViewSystem is Fasteners Shown full size. See Parts List for description Parts IdentificationInstall the entrapment Warning label Safety InformationPRE-INSTALLATION Warning Sect 1-MAIN Assembly Install couplerMain Assembly Attach middle rail BSlide collar Make sure rail assembly is resting straight and level Install carriage stopInstall carriage Attach end rail CAttach emergency release knob, cord Attach limit switchesSwitch TagSect 2-INSTALLATION Determining header bracket locationFinal header bracket mounting location InstallationFinding highest point of travel Mounting preparation Mount header bracketAttaching rail to header bracket Support device, such as a ladderMounting power head Suspended Ceiling . It must beMounting door bracket Possible. -12A & BFor 1-piece doors Adjust emergency release knob heightAttach door arms 23 For sectional doors Mounting brackets Sect 3-SAFE-T-BEAM InstallationWiring Mounting STB source and sensorSAFE-T-BEAM Installation Check the followingMount wall control. Fig Sect 4-WALL Control InstallationAttach wires to terminals. -2, Fig Mount entrapment warning label. FigSect 5 -LIGHT & Lens Installation With Grounded Plug Sect 6-CONNECTING PowerConnect Power with Plug Adjust closing force Sect 7-SETTINGS Force & LimitsAdjust opening force Install/replace battery Fig Sect 8-BATTERY & Visor ClipSettings Contact Reverse Attach visor clip FigProgramming Remote Controls Safety Instructions Monthly Maintenance Sect 10-MAINTENANCE & TroubleshootingTroubleshooting Maintenance CHECK-OFFMaintenance & Troubleshooting Use only with included Series II wall controlSect 11-WIRING Diagram Electrical ShockVisit Our Website at Visitar Website nuestro en Garage Door Operator Accessories Order Form Genie Company

3511035556 specifications

The Genie 3511035556 is a sophisticated piece of technology designed to meet the demands of modern lifting and material handling tasks. This model is particularly notable for its exceptional efficiency, safety features, and versatility, making it suitable for various industrial applications.

One of the standout features of the Genie 3511035556 is its advanced hydraulic system, which allows for smooth and precise operation. This hydraulic system not only enhances lifting capacity but also ensures that the platform can rise quickly and steadily, reducing downtime and increasing productivity on job sites. The lift has a maximum working height that is ideal for accessing elevated areas, while its compact design allows for maneuverability in tight spaces.

In terms of safety, the Genie 3511035556 is equipped with several innovative technologies. The model includes a robust safety cage with guardrails that provide secure access for operators. Additionally, the anti-rollback and overload protection systems are integrated to prevent accidents and ensure that the lifting operations are performed safely. These features help to mitigate risks, providing peace of mind for operators and supervisors alike.

The Genie 3511035556 also boasts a user-friendly control system. Operators benefit from an intuitive interface that can easily control the lift’s various functions, allowing for quick adjustments and operations. This ease of use is complemented by a range of smart technology options, including diagnostics that notify operators of potential maintenance needs before they become an issue. This proactive approach to maintenance not only enhances safety but also extends the lifecycle of the equipment.

Durability is another prominent characteristic of the Genie 3511035556. Its construction utilizes high-quality materials designed to withstand the rigors of daily use in challenging environments. This robust build ensures that the lift can maintain optimal performance even under heavy loads, making it a reliable choice for construction sites, warehouses, and maintenance applications.

In summary, the Genie 3511035556 stands out for its powerful hydraulic system, comprehensive safety features, user-friendly interface, and durable construction. This model is engineered for superior performance and reliability, catering to the needs of professionals seeking efficiency and safety in their lifting operations. As industries continue to evolve, lifts like the Genie 3511035556 play a crucial role in enhancing workflow and ensuring safe handling of materials at various heights.
Top Page Image Contents