Allstar Products Group ACJ9500, AC9300, AC9500 HOW the Door Moves When the Opener is Activated

Page 16

E: OPERATION AND ADJUSTMENT INSTRUCTIONS

HOW THE DOOR MOVES WHEN THE OPENER IS ACTIVATED

Always keep moving door in sight and away from people and objects until it is completely closed

NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.

IF THE DOOR IS...

...FULLY OPEN, then pushing the standard wall Push Button or the radio control will cause the door to begin MOVING

DOWNWARD.

...FULLY CLOSED, then pushing the wall Push Button or the radio control will cause the door to begin MOVING UPWARD.

...MOVING UPWARD, then pushing the wall Push Button will cause the door to STOP. The next push of the wall button will cause the door to begin MOVING DOWNWARD (Alternate Action Operation).

...MOVING DOWNWARD, then pushing the wall Push Button or the radio control will cause the door to STOP. The next activation will cause the door to BEGIN MOVING UPWARD.

...MOVING DOWNWARD and an obstruction is encountered, the door will STOP, PAUSE AND REVERSE TO THE OPEN

DIRECTION.

...MOVING UPWARD and an obstruction is encountered, the door will STOP. The next activation will CLOSE the door.

The SAFE FINISH PHOTOELECTRIC uses an invisible beam which, when broken by an obstruction, causes a closing door to open and prevents an open door from closing.

HOW THE LIGHT WORKS AND WHAT IT MEANS WHEN IT FLASHES

1.The convenience light automatically turns on when the opener is activated and remains on for 4-1/2 minutes for your convenience and safety.

2.The light will flash after coming upon an obstruction in the down direction to alert you of a problem. It will continue to flash for 4-1/2 minutes, then shut off.

3.Optional Wall Station adds the convenience of allowing the light to be turned on and stay on until turned off by a second push of the button or activation of door cycle.

If the light begins to flash and the door does not move in the close direction from a push button or radio, the external safety device (Safe Finish Photoelectric) is activated or defective (misaligned or blocked etc.). To temporarily override and close door, activate pushbutton or wall station for 2 seconds; opener will begin moving in the down direction. The button must remain depressed until the cycle is completed. If the button is released before cycle is completed, the door will reverse and come to a fully open position. Problems with the safety system should be inspected by a professional garage door installer.

HOW TO OPERATE THE DOOR MANUALLY - MANUAL RELEASE DISCONNECT

The door should be fully closed, if possible, before using the manual disconnect. Weak or broken springs could allow an open door to fall rapidly. Property damage or serious personal injury could result. Do not use the manual release handle to pull the door open or closed.

Your opener is equipped with a manual release recessed trolley-type disconnect system, enabling manual operation of the garage door during a power failure.

Trolley

The trolley is disconnected from the chain by pulling down on the red release handle, allowing the garage door to be operated manually.

The trolley will automatically reconnect when power is restored and the door is

 

 

 

activated.

 

 

 

 

 

110058-1

 

 

 

If the manual release is used, close the door before reactivating the opener.

 

 

Manual Release Knob

 

 

 

 

NOTE: Outside keylock manual releases are an available accessory and are recommended for garages without a service entrance.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Challenger AC9000 Series Table of Contents Standard Features Product FeaturesOptional Features Component Identification Tools RequiredAssembly Instructions Important Installation Instructions Installing the Operator Reinforce the Header WallHigh ARC Rise Horizontal Line Step Return to the Rail/WallConnecting Door Arm to Trolley 110054-2Step 9 Connecting the Door Arm to the DoorConnecting the Door Arm to the Door ONE Piece Doors Using Optional ONE Piece Door ARM AssemblyControl and Auxiliary Equipment FLOOR, OUT of Reach of ChildrenSafe Finish Photosystem Installation Wire Connect the PhotosystemFinal Installation of Photosystem Units Control and Auxiliary EquiipmentInstallation of Radio Controls TransmitterTurning on Power to the Operator Basic Operating Parameters Operation and Adjustment InstructionsHOW to Activate the Opener HOW the Door Moves When the Opener is Activated HOW the Light Works and What IT Means When IT FlashesHOW to Operate the Door Manually Manual Release Disconnect No ONE should Cross the Path of a Moving DoorAdjustment #2 Opening and Closing Force Adjustment #1 Opening TravelOptional Three Function Deluxe Wall Station Adjustment #4 Obstruction Sensing Closing Direction Adjustment #3 Setting Door Close LimitRepeat this Test Monthly Adjustment #7 Resetting the Travel Timer Adjustment #6 Positive Mechanical Lock AdjustmentImportant Test Photoelectric Obstruction Test Safe Finish Wiring Diagram / Maintenance Schedule Maintenance of Your OpenerInstallation Checklist Troubleshooting Guide Symptom Probable CAUSE/SOLUTIONSolution Probable CauseParts Breakdown & Listing Allstar Corporation Downingtown, PA

AC9300, AC9500, ACJ9500 specifications

Allstar Products Group has established a strong reputation in the field of automotive accessories, and their line of ACJ9500, AC9500, and AC9300 models exemplifies this commitment to quality and functionality. These units are designed to cater to a wide range of needs, enhancing vehicle performance and user convenience.

The ACJ9500 is particularly noteworthy for its impressive power output and versatility. It is equipped with a robust motor that delivers efficient performance, making it suitable for various applications, from automotive work to home improvement tasks. One of its standout features is the adjustable speed setting, allowing users to customize the airflow according to their specific needs. This model also includes a durable construction that ensures longevity, even under demanding conditions.

Moving on to the AC9500, this unit is celebrated for its compact design, which does not compromise on power or efficiency. It is lightweight and portable, making it an ideal choice for individuals who require a reliable tool that can be easily transported. The AC9500 is equipped with user-friendly controls that simplify operation, ensuring that even those with minimal experience can quickly get the hang of it. Its noiseless operation is another significant advantage, perfect for environments where quiet is essential.

The AC9300 model rounds out the lineup with its emphasis on energy efficiency. This unit utilizes cutting-edge technology, which minimizes power consumption while maintaining optimal performance. It is specifically designed to reduce energy waste, making it an environmentally friendly option for customers who are conscious of their ecological footprint. The AC9300 also features a unique ventilation system that enhances airflow, promoting better circulation and cooling, which is especially valuable in automotive applications.

In summary, the Allstar Products Group models ACJ9500, AC9500, and AC9300 deliver a combination of power, efficiency, and user-friendly features that cater to diverse needs. Their innovative technologies and durable designs showcase Allstar’s commitment to providing high-quality automotive accessories. Each model stands out for its specific strengths, making them suitable for different tasks and environments. Whether for professional or personal use, these models continue to meet the demands of consumers looking for reliability and performance in automotive tools. The combination of functionality and practicality ensures that Allstar's offerings remain competitive in the market.
Top Page Image Contents