Allstar Products Group AC9300 Operation and Adjustment Instructions, HOW to Activate the Opener

Page 15

E:OPERATION AND ADJUSTMENT INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF SEVERE

INJURY OR DEATH: READ AND FOLLOW ALL USER / SAFETY INSTRUCTIONS!

•NEVER let children operate or play with door controls. Keep the Remote Control away from children.

•ALWAYS keep a moving door in sight and keep people and objects away from the door area until the door is completely closed. NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.

•NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR.

•TEST THE DOOR OPENER MONTHLY. The door MUST reverse upon contact with a 1-1/2” high object (or a 2 X 4 board laid flat) on the floor. After adjusting the sensitivity or the limit of travel, ALWAYS RETEST the Opener. Failure to ADJUST THE OPENER PROPERLY may result in SERIOUS INJURY OR DEATH.

•If possible, USE THE EMERGENCY RELEASE only when the door is closed. Use caution when using the Release with the door open. WEAK OR BROKEN SPRINGS MAY ALLOW THE DOOR TO CLOSE RAPIDLY, CAUSING SEVERE INJURY OR DEATH.

•KEEP THE GARAGE DOOR PROPERLY BALANCED. See the door owner's manual. An improperly balanced door MAY CAUSE SEVERE INJURY OR DEATH. Have a QUALIFIED SERVICE PERSON MAKE REPAIRS TO CABLES, SPRING ASSEMBLIES AND OTHER HARDWARE.

•SAVE THIS INSTRUCTION MANUAL.

TURNING ON POWER TO THE OPERATOR

NOTE: It is now necessary to turn on the power in order to run the Opener to test the operation and check the limit settings. Before doing so, ensure that all mounting hardware is installed and has been properly tightened, that all electrical connections are per local code requirements, and that proper wiring practices have been followed. Also, double-check that all ropes have been removed from the door and that the doorway is clear.

BASIC OPERATING PARAMETERS

Please note the following Operating Parameters which apply to Openers with Auxiliary Entrapment Protection System (Safe Fin- ish™ Photosystem, Installation Instructions on Page 13) and a standard wall push button connected. Please see page 17 for instruc- tions concerning the Deluxe Wall Push Button operating parameters.

HOW TO ACTIVATE THE OPENER

Never let children operate or play with the door controls. Keep Remote Control Away for Children.

Use any of the following devices:

1.The Remote Control Transmitter. Hold the push button down until the door starts to move, then release button.

2.The Door Control Button. Momentary push of the button until the door starts to move. Constant push of the button until the door is closed is required if light flashes.

3.An Outside Keylock or Keyless Entry System (if you have installed either of these options, see Mfg’s instructions).

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Challenger AC9000 Series Table of Contents Product Features Standard FeaturesOptional Features Tools Required Component IdentificationAssembly Instructions Important Installation Instructions Reinforce the Header Wall Installing the OperatorHigh ARC Rise Horizontal Line Return to the Rail/Wall Step110054-2Step 9 Connecting the Door Arm to the Door Connecting Door Arm to TrolleyDoors Using Optional ONE Piece Door ARM Assembly Connecting the Door Arm to the Door ONE PieceFLOOR, OUT of Reach of Children Control and Auxiliary EquipmentControl and Auxiliary Equiipment Safe Finish Photosystem InstallationWire Connect the Photosystem Final Installation of Photosystem UnitsTransmitter Installation of Radio ControlsOperation and Adjustment Instructions Turning on Power to the Operator Basic Operating ParametersHOW to Activate the Opener No ONE should Cross the Path of a Moving Door HOW the Door Moves When the Opener is ActivatedHOW the Light Works and What IT Means When IT Flashes HOW to Operate the Door Manually Manual Release DisconnectAdjustment #1 Opening Travel Adjustment #2 Opening and Closing ForceOptional Three Function Deluxe Wall Station Adjustment #3 Setting Door Close Limit Adjustment #4 Obstruction Sensing Closing DirectionRepeat this Test Monthly Adjustment #6 Positive Mechanical Lock Adjustment Adjustment #7 Resetting the Travel TimerImportant Test Photoelectric Obstruction Test Maintenance of Your Opener Safe Finish Wiring Diagram / Maintenance ScheduleInstallation Checklist Probable Cause Troubleshooting GuideSymptom Probable CAUSE/SOLUTION SolutionParts Breakdown & Listing Allstar Corporation Downingtown, PA

AC9300, AC9500, ACJ9500 specifications

Allstar Products Group has established a strong reputation in the field of automotive accessories, and their line of ACJ9500, AC9500, and AC9300 models exemplifies this commitment to quality and functionality. These units are designed to cater to a wide range of needs, enhancing vehicle performance and user convenience.

The ACJ9500 is particularly noteworthy for its impressive power output and versatility. It is equipped with a robust motor that delivers efficient performance, making it suitable for various applications, from automotive work to home improvement tasks. One of its standout features is the adjustable speed setting, allowing users to customize the airflow according to their specific needs. This model also includes a durable construction that ensures longevity, even under demanding conditions.

Moving on to the AC9500, this unit is celebrated for its compact design, which does not compromise on power or efficiency. It is lightweight and portable, making it an ideal choice for individuals who require a reliable tool that can be easily transported. The AC9500 is equipped with user-friendly controls that simplify operation, ensuring that even those with minimal experience can quickly get the hang of it. Its noiseless operation is another significant advantage, perfect for environments where quiet is essential.

The AC9300 model rounds out the lineup with its emphasis on energy efficiency. This unit utilizes cutting-edge technology, which minimizes power consumption while maintaining optimal performance. It is specifically designed to reduce energy waste, making it an environmentally friendly option for customers who are conscious of their ecological footprint. The AC9300 also features a unique ventilation system that enhances airflow, promoting better circulation and cooling, which is especially valuable in automotive applications.

In summary, the Allstar Products Group models ACJ9500, AC9500, and AC9300 deliver a combination of power, efficiency, and user-friendly features that cater to diverse needs. Their innovative technologies and durable designs showcase Allstar’s commitment to providing high-quality automotive accessories. Each model stands out for its specific strengths, making them suitable for different tasks and environments. Whether for professional or personal use, these models continue to meet the demands of consumers looking for reliability and performance in automotive tools. The combination of functionality and practicality ensures that Allstar's offerings remain competitive in the market.
Top Page Image Contents