Echo WP-1000 T1E manual Maintenance, Skill levels, Maintenace intervals

16

Maintenance

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.

Your ECHO water pump is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your water pump achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR- SELF or have the ECHO Dealer do it, each maintenance task has been graded.

skill levels

Level 1 = Easy to do. Most required tools come with unit.

Level 2 = Moderate difficulty. Some specialized tools may be required.

ECHO offers REPOWER Maintenance Kits and Parts to make your maintenance job easier. Just below each task head- ing are listed the various part numbers required for that task. See your ECHO dealer for these parts.

maintenace intervals

COMPONENT/	MAINTENANCE	REQ'D SKILL	DAILY OR	EVERY	3 MONTHS	YEARLY 600
					OR 90
SYSTEM	PROCEDURE	LEVEL	BEFORE USE	REFUEL		HOURS
					HOURS
Air Filter	Inspect/Clean	1	I / C *
Choke Shutter	Inspect/Clean	1	I / C
Fuel Filter	Inspect	1			I *	I / R *
Fuel Cap Gasket	Inspect/Replace	1			I *	R *
Fuel System	Inspect/Replace	1	I *	I *
Spark Plug	Inspect/Clean	1			I / C / R *
Cooling System	Inspect/Clean	2	I / C
Muffler Spark Arrestor	Inspect/Clean/Replace	2			I / C / R *
Cylinder Exhaust Port	Inspect/Clean/Decarbon	2			I / C
Recoil Starter Rope	Inspect/Clean	1	I / C *
Screws/Nuts/Bolts	Inspect/Tighten/Replace	1	I *

MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN

IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES:

* Replacement is recommended based on the finding of damage or wear during inspection.