Water Pump | 9 | |
Operator's Manual | ||
|
|
|
Contents
Due to packaging restrictions, the ECHO product you have purchased requires some assembly.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
____ | 1 | - | Pump Assembly |
____ | 1 | - | Suction Hose (#21) |
____ | 1 | - | Operator's Manual |
____ | 1 | - | Emission Control Warranty Statement |
____ | 1 | - | Warranty Registration Card |
____ | 1 | - | Plastic Bag |
____ |
|
| 1, Garden Hose Adaptor (#23) |
____ |
|
| 3, Hose Clamps (#20) |
____ |
|
| 2, Hose Fittings (#18) |
____ |
|
| 2, Hose Connecter (#19) |
____ |
|
| 2, Sealing Washers (#17) |
____ |
|
| 1, Strainer (#22) |
Assembly suction hose
1.Remove vinyl cap from suction port (G).
2.Assemble suction hose (A) with clamp (B), hose connecter (C), hose fitting (D), and sealing washer (E) on one end and strainer
(F) with second clamp on the other end.
3.Attach hose to suction port (G).
NOTE
Longer 25 mm (1 inch) suction hose can be used up to a maximum length of 7.5 m (24 feet).
B C
D E
IMPORTANT
•Make sure that all hose and pipe connections are air tight. An air leak in the suction line or suction fittings may prevent priming and will reduce the pumps capacity or efficiency.
•Keep priming port plug and pump drain plug tightly secured in place to prevent entry of air into the pump.
•Use an acceptable pipe thread sealant on all threaded nipple con- nections.
IMPORTANT
Always use the strainer with the suction hose. Gravel or debris sucked into the pump will cause serious impeller and housing dam- age.
If the strainer clogs with debris, prevent the strainer from touching the bottom. Placing the strainer in a submerged bucket or basket may also work.
AG
B
F