Harman-Kardon AVR 510 owner manual Installation and Connections, System Installation

Page 15

Installation and Connections

System Installation

After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to make the connections to your audio and video equipment.

Audio Equipment Connections

We recommend that you use high-quality inter- connect cables when making connections to source equipment and recorders to preserve the integrity of the signals.

When making connections to audio source equipment or speakers, it is always a good practice to unplug the unit from the AC wall outlet. This prevents any possibility of acciden- tally sending audio or transient signals to the speakers that may damage them.

1.Connect the analog output of a CD player to the CD inputs •.

NOTE: When the CD player has both fixed and variable audio outputs, it is best to use the fixed output unless you find that the input to the receiver is so low that the sound is noisy, or so high that the signal is distorted.

2.Connect the analog Play/Out jacks of a cas- sette deck, MD, CD-R or other audio recorder to the Tape Input jacks ¡. Connect the analog Record/In jacks on the recorder to the Tape Output jacks ™ on the AVR 510.

3.Connect the output of any digital sources to the appropriate input connections on the AVR 510 rear panel. Note that the Optical and Coaxial digital inputs 31 32 #% may be used with a Dolby Digital or DTS source or the output of a conventional CD or LD player’s PCM (S/P-DIF) output.

4.Connect the coaxial or optical Digital Audio Outputs 33 on the rear panel of the AVR 510 to the matching digital input connections on a CD-R or MiniDisc recorder.

5.Assemble the AM Loop Antenna supplied with the unit as shown below. Connect it to the AM and GND screw terminals ¢.

6.Connect the supplied FM antenna to the FM (75-ohm) connection ¶. The FM antenna may be an external roof antenna, an inside powered or wire-lead antenna or a connection from a cable TV system. Note that if the antenna or connection uses 300-ohm twin-lead cable, you must use the 300-ohm-to-75-ohm adapter sup- plied with the unit to make the connection.

7.Connect the front, center and surround speaker outputs fi to the respective speakers.

To ensure that all the audio signals are carried to your speakers without loss of clarity or reso- lution, we suggest that you use high-quality speaker cable. Many brands of cable are avail- able and the choice of cable may be influenced by the distance between your speakers and the receiver, the type of speakers you use, personal preferences and other factors. Your dealer or installer is a valuable resource to consult in selecting the proper cable.

Regardless of the brand of cable selected, we recommend that you use a cable constructed of fine, multistrand copper with a gauge of 14 or smaller. Remember that in specifying cable, the lower the number, the thicker the cable.

Cable with a gauge of 16 may be used for short runs of less than ten feet. We do not recom- mend that you use cables with an AWG equiva- lent of 18 or higher, due to the power loss and degradation in performance that will occur.

Cables that are run inside walls should have the appropriate markings to indicate listing with UL, CSA or other appropriate testing agency stan- dards. Questions about running cables inside walls should be referred to your installer or a licensed electrical contractor who is familiar with the NEC and/or the applicable local build- ing codes in your area.

When connecting wires to the speakers, be cer- tain to observe proper polarity. Remember to connect the “negative” or “black” wire to the same terminal on both the receiver and the speaker. Similarly, the “positive” or “red” wire should be connected to like terminals on the AVR 510 and speaker.

NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some manufacturers may vary from this config-

uration. To ensure proper phase and optimal performance, consult the identification plate on your speaker or the speaker’s manual to verify polarity. If you do not know the polarity of your speaker, ask your dealer for advice before pro- ceeding, or consult the speaker’s manufacturer.

We also recommend that the length of cable used to connect speaker pairs be identical. For example, use the same length piece of cable to connect the front-left and front-right or surround-left and surround-right speakers, even if the speakers are a different distance from the AVR 510.

8.Connections to a subwoofer are normally made via a line-level audio connection from the Subwoofer Output ‹ to the line-level input of a subwoofer with a built-in amplifier. When a passive subwoofer is used, the connection first goes to a power amplifier, which will be con- nected to one or more subwoofer speakers. If you are using a powered subwoofer that does not have line-level input connections, follow the instructions furnished with the speaker for con- nection information.

15INSTALLATION AND CONNECTIONS

Page 14 Page 16
Image 15
Page 14 Page 16
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Multiple Digital Inputs and Outputs Description and FeaturesIntroduction While complex digital systems are hardSafety Information Important Safety InformationUnpacking Set Button  Input Indicators Ò Delay Front Panel Controls# Digital Optical 3 Input Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control FunctionsChannel Direct Input ª as the source ` Preset Up/Down When the tuner is37 6-Ch. Direct Input Press this button To select the component connected toBetween the AM and FM bands Zone II Remote Control FunctionsConnect the analog output of a CD player to the CD inputs Installation and ConnectionsSystem Installation Audio Equipment ConnectionsMultiroom IR Link System and Power ConnectionsVideo Equipment Connections Video Connection NotesExternal Audio Power Amplifier Connections AC Power ConnectionsExternal Audio Decoder Connection System Setup System ConfigurationSpeaker Selection and Placement Speaker PlacementPlug the AC Power Cord into an unswitched AC outlet Using the On-Screen DisplaySetting the System Configuration Memories Input Setup Surround SetupOr the ⁄/¤ buttons n on the remote Buttons on the remote will take you to the delay settings Delay SettingsNight Mode Settings Surround Speaker SetupOutput Level Adjustment If no subwoofer is connected toInformation Display Y Using EzSet Manual Output Level AdjustmentAVR 510 off using the Main Power Switch Additional Input Adjustments Operation Basic OperationSource Selection Surround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Selecting a Digital SourceDigital Status Indicators Addition to the bitstream indicators,Night Mode Tuner Operation PCM Audio PlaybackMP3 Audio Playback Volume Control Ó 34 î Output Level Trim AdjustmentPreset Tuning Recalling Preset StationsChannel Direct Input Memory BackupDisplay Brightness AVR 510’s Main Information Display Advanced FeaturesTurn-On Volume Level Semi-OSD SettingsFull-OSD Time-Out Adjustment Multiroom Operation Multiroom SetupInstallation Multiroom OperationProgramming the Remote Programming the RemoteLearning Codes Erasing Learned CodesMacro Programming Programmed Device Functions Erasing Macro CommandsMode Selector/Channel Down button k Press the AVR Selector fVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Direct Preset UpPreset Down Tune UpSetup Code Table TV 021 031 084001 011 030 033 042 044 100 107 115 154 160 167 168 175 176Setup Code Table VCR 070 074 078 086 114 125 150 167 172 159057 058 147 166Setup Code Table CD 039 051 138 149 209 037 038 045 046 171 175 202 203020 036 056 057 064 065 089 090 091 092 096 099 104 212 015 075 109 119 158 183 204Setup Code Number Setup Code Table TapeSetup Code Table Audio Setup Code Table DVDSetup Code Table SAT Setup Code Table CBL 063 115 111 112 213053 214 055 056 061 099 100 101 207Lights, motors or other electrical appliances Troubleshooting GuideProcessor Reset Information from nonencoded programsPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents