Harman-Kardon AVR 510 owner manual Additional Input Adjustments

Page 25

System Configuration

Continue to adjust the individual channels until the volume level sounds the same from each speaker. Note that adjustments should be made with the ‹/› buttons o 31 on the remote only, NOT the main volume controls. If you are using a sound-pressure level (SPL) meter for precise level adjustment, set the volume so that the meter reads 75dB, C-Weighting Slow.

You may also adjust the output levels manually while using the level indication feature of the EzSet remote. To activate the sensor and indica- tor, simply press and release the SPL Indicator

Select button 36 on the remote while the test tone is circulating. The Program/SPL Indicator c will change color to indicate the level. Adjust the level using the ‹/› buttons

o31 until the LED lights green for all chan- nels. When it is red, the level is too high; when it is amber, the level is too low. Press the SPL Indicator Select 36 button when you are finished to turn the sensor and Indicator off.

NOTE: The subwoofer output level is not adjustable using the test tone. To change the subwoofer level, follow the steps for Output Level Trim Adjustment on page 31.

When all channels have an equal volume level, the adjustment is complete. To exit this menu, press the ⁄/¤ buttons n until the on-screen

›cursor is next to the RETURN TO MENU line, and then press the Set button p to return to the MASTER MENU.

The output levels may also be adjusted at any time using the discrete buttons and semi-OSD system. To adjust the output levels in this fash- ion, press the Test Tone Selector ˆi. As soon as the button is pressed, the test tone will begin to circulate as indicated earlier. The cor- rect channel from which the test noise should be heard will be shown in the lower third of the video screen and in the Main Information Display Y. While the test noise is circulating, the proper channel position will also be indicated in the Speaker/Channel Input Indicators Q by a blinking letter within the correct channel.

To adjust the output level, press the Selector buttons 5 on the front panel or the ‹/› buttons o 31 until the desired level is

shown in the display or on screen. Once the buttons are released, the test noise will begin to circulate again in five seconds.

When all channels have the same output level, press the Test Tone Selector ˆi button again to complete the process.

NOTE: Output level adjustment is not available for the VMAx or Surround Off mode.

Additional Input Adjustments

After one input has been adjusted for Surround mode, digital input (if any), speaker type, and output levels, go back to the INPUT SETUP line on the MASTER MENU and enter the settings for each input that you will use. In most cases, only the digital input and surround mode will be different from one input to the next, while the speaker type, crossover frequency, Night mode and output level settings will usually be the same and may be quickly entered by entering the same data used for the original input.

Once the settings outlined on the previous pages have been made, the AVR 510 is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to listen to a vari- ety of sources and different kinds of program material. These advanced settings are described on pages 28 to 34 of this manual. In addition, any of the settings made in the initial configu- ration of the unit may be changed at any time. As you add new or different sources or speak- ers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown in this section.

Having completed the setup and configuration process for your AVR 510, you are about

to experience the finest in music and home- theater listening. Enjoy!

25SYSTEM CONFIGURATION

Page 24 Page 26
Image 25
Page 24 Page 26
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Multiple Digital Inputs and OutputsImportant Safety Information Safety InformationUnpacking Front Panel Controls Set Button  Input Indicators Ò Delay# Digital Optical 3 Input Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control Functions37 6-Ch. Direct Input Press this button ` Preset Up/Down When the tuner isTo select the component connected to Channel Direct Input ª as the sourceBetween the AM and FM bands Zone II Remote Control FunctionsSystem Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputsVideo Equipment Connections System and Power ConnectionsVideo Connection Notes Multiroom IR LinkAC Power Connections External Audio Power Amplifier ConnectionsExternal Audio Decoder Connection Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupUsing the On-Screen Display Plug the AC Power Cord into an unswitched AC outletSetting the System Configuration Memories Surround Setup Input SetupOr the ⁄/¤ buttons n on the remote Delay Settings Buttons on the remote will take you to the delay settingsNight Mode Settings Surround Speaker SetupIf no subwoofer is connected to Output Level AdjustmentInformation Display Y Manual Output Level Adjustment Using EzSetAVR 510 off using the Main Power Switch Additional Input Adjustments Basic Operation OperationSource Selection Surround Mode Chart Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Dolby DigitalAddition to the bitstream indicators, Digital Status IndicatorsNight Mode PCM Audio Playback Tuner OperationMP3 Audio Playback Preset Tuning Output Level Trim AdjustmentRecalling Preset Stations Volume Control Ó 34 îChannel Direct Input Memory BackupTurn-On Volume Level Advanced FeaturesSemi-OSD Settings Display Brightness AVR 510’s Main Information DisplayFull-OSD Time-Out Adjustment Installation Multiroom SetupMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteErasing Learned Codes Learning CodesMacro Programming Mode Selector/Channel Down button k Erasing Macro CommandsPress the AVR Selector f Programmed Device FunctionsChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Preset Down Preset UpTune Up DirectSetup Code Table TV 001 011 030 033 042 044 100 107 115 154 160 167 168 084175 176 021 031Setup Code Table VCR 057 058 159147 166 070 074 078 086 114 125 150 167 172Setup Code Table CD 020 036 056 057 064 065 089 090 091 092 096 099 104 212 037 038 045 046 171 175 202 203015 075 109 119 158 183 204 039 051 138 149 209Setup Code Table Audio Setup Code Table TapeSetup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 053 214 111 112 213055 056 061 099 100 101 207 063 115Processor Reset Troubleshooting GuideInformation from nonencoded programs Lights, motors or other electrical appliancesPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents