Harman-Kardon Explore the Harman Kardon AVR 510 Specifications and Features
Page 55

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

80 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

70 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

70 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

70 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 100kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

Tuner Output Level

1kHz, ±75kHz Dev 500mV

AM Tuner Section

 

Frequency Range

520 –1710 kHz

Signal-to-Noise Ratio

45 dB

Usable Sensitivity

Loop 500 µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

 

Television Format

NTSC

Input Level/Impedance

1Vp-p /75 ohms

Output Level/Impedance

1Vp-p /75 ohms

Video Frequency

 

Response

10Hz–8MHz (–3dB)

General

 

Power Requirement

AC 120V/60Hz

Power Consumption

78W idle, 694W maximum

 

(2 channels driven)

Dimensions (Max)

 

Width

17.3 inches (440mm)

Height

6.5 inches (165mm)

Depth

17.1 inches (435mm)

Weight

35 lb (15.9 kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark, of Harman Kardon, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.

UltraStereo is a trademark of UltraStereo Corp.

VMAx is a registered trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

Crystal is a registered trademark of Cirrus Logic Corp.

HDCD system manufactured under license from Pacific Microsonics, Inc. This product is

covered by one or more of the following: In the USA: 5,479,168; 5,638,074; 5,640,161; 5,808,574;

5,838,274; 5,854,600; 5,864,311; 5,872,531; and in Australia: 669114. Other patents pending.

55TECHNICAL SPECIFICATIONS

Page 54 Page 56
Image 55
Page 54 Page 56
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Multiple Digital Inputs and Outputs Description and FeaturesIntroduction While complex digital systems are hardImportant Safety Information Safety InformationUnpacking Front Panel Controls Set Button  Input Indicators Ò Delay# Digital Optical 3 Input Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control FunctionsChannel Direct Input ª as the source ` Preset Up/Down When the tuner is37 6-Ch. Direct Input Press this button To select the component connected toBetween the AM and FM bands Zone II Remote Control FunctionsConnect the analog output of a CD player to the CD inputs Installation and ConnectionsSystem Installation Audio Equipment ConnectionsMultiroom IR Link System and Power ConnectionsVideo Equipment Connections Video Connection NotesAC Power Connections External Audio Power Amplifier ConnectionsExternal Audio Decoder Connection System Setup System ConfigurationSpeaker Selection and Placement Speaker PlacementUsing the On-Screen Display Plug the AC Power Cord into an unswitched AC outletSetting the System Configuration Memories Surround Setup Input SetupOr the ⁄/¤ buttons n on the remote Delay Settings Buttons on the remote will take you to the delay settingsNight Mode Settings Surround Speaker SetupIf no subwoofer is connected to Output Level AdjustmentInformation Display Y Manual Output Level Adjustment Using EzSetAVR 510 off using the Main Power Switch Additional Input Adjustments Basic Operation OperationSource Selection Surround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Selecting a Digital SourceAddition to the bitstream indicators, Digital Status IndicatorsNight Mode PCM Audio Playback Tuner OperationMP3 Audio Playback Volume Control Ó 34 î Output Level Trim AdjustmentPreset Tuning Recalling Preset StationsChannel Direct Input Memory BackupDisplay Brightness AVR 510’s Main Information Display Advanced FeaturesTurn-On Volume Level Semi-OSD SettingsFull-OSD Time-Out Adjustment Multiroom Operation Multiroom SetupInstallation Multiroom OperationProgramming the Remote Programming the RemoteErasing Learned Codes Learning CodesMacro Programming Programmed Device Functions Erasing Macro CommandsMode Selector/Channel Down button k Press the AVR Selector fChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Direct Preset UpPreset Down Tune UpSetup Code Table TV 021 031 084001 011 030 033 042 044 100 107 115 154 160 167 168 175 176Setup Code Table VCR 070 074 078 086 114 125 150 167 172 159057 058 147 166Setup Code Table CD 039 051 138 149 209 037 038 045 046 171 175 202 203020 036 056 057 064 065 089 090 091 092 096 099 104 212 015 075 109 119 158 183 204Setup Code Number Setup Code Table TapeSetup Code Table Audio Setup Code Table DVDSetup Code Table SAT Setup Code Table CBL 063 115 111 112 213053 214 055 056 061 099 100 101 207Lights, motors or other electrical appliances Troubleshooting GuideProcessor Reset Information from nonencoded programsPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents