Harman-Kardon AVR 510 Digital Status Indicators, Addition to the bitstream indicators, Night Mode

Page 29

Operation

source is playing, the AVR 510 will automat- ically detect whether it is a multichannel Dolby Digital, DTS source, MP3 or a conventional PCM signal, which is the standard output from CD players. A Bitstream Indicator A will light in the Main Information Display Û to confirm that the digital signal is Dolby Digital, DTS or PCM.

Digital Status Indicators

When a digital source is playing, the AVR 510 senses the type of bitstream data that is pres- ent. Using this information, the correct sur- round mode will automatically be selected. For example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bit- streams will enable Dolby Digital decoding. When the unit senses PCM data from CDs and LDs, it will allow the appropriate surround sources to be selected manually. Since the range of available surround modes is depend- ent on the type of digital data that is present, the AVR 510 uses a variety of indicators to let you know what type of signal is present. This will help you to understand the choice of modes.

When a digital source is playing, a Bitstream Indicator A will light to show which type of signal is playing:

DOLBY D: When the DOLBY D indicator lights, a Dolby Digital bitstream is being received. Depending on the settings on the source player and specific surround information and number of channels on the disc, a number of surround modes are possible. For discs with full 5.1 audio, only the Dolby Digital and VMAx modes are available. When the Dolby Digital signal is only two-channel, you may also select from the Logic 7 Cinema/Music, Hall, Theater, Dolby Pro Logic or Dolby 3 Stereo modes.

DTS: When the DTS indicator lights, a DTS bitstream is being received. When the unit senses this type of data, only the DTS mode may be used.

PCM: When the PCM indicator lights, a stan- dard Pulse Code Modulation, or PCM, signal is being received. This is the type of digital audio used by conventional compact disc and laser disc recordings. When a PCM bitstream is pres- ent, all modes except Dolby Digital and DTS are available.

®

:When this indicator lights in con- junction with the PCM indicator, the CD that is playing is encoded through the special High Definition Compatible Digital® process. HDCD® discs use 20-bit encoding and other proprietary processing to provide the ultimate in CD listen- ing. Note that HDCD processing is only avail- able in the Stereo or Surround Off mode.

MP3: When the MP3 indicator lights, a com- patible MPEG 1/Layer 3 digital signal is being received. This is the popular audio format used by many computer programs for recording com- pressed audio files. When an MP3 bitstream is present, the sound will automatically be played in the Stereo (Surround Off) mode. The surround modes are not available during MP3 playback.

In addition to the bitstream indicators, the

AVR 510 features a set of unique channel-input indicators that tell you how many channels of digital information are being received and/or whether the digital signal is interrupted.

These indicators are the L/C/R/LS/RS/LFE letters that are inside the center boxes of the Speaker/Channel Input Indicators Q in the front panel Main Information Display Û. When a standard analog signal is in use, only the “L” and “R” indicators will light, as analog signals have only left and right channels.

Digital signals, however, may have two, five or six separate channels, depending on the pro- gram material, the method of transmission and the way in which it was encoded. When a digi- tal signal is playing, the letters in these indica- tors will light in response to the specific signal being received. It is important to note that although Dolby Digital, for example, is referred to as a “5.1” system, not all Dolby Digital DVDs or programs are encoded for 5.1. Thus, it is sometimes normal for a DVD with a Dolby Digital soundtrack to trigger only the “L” and “R” indicators.

NOTE: Many DVD discs are recorded with both “5.1” and “2.0” versions of the same sound- track. When playing a DVD, always be certain to check the type of material on the disc. Most discs show this information in the form of a listing or icon on the back of the disc jacket. When a disc does offer multiple soundtrack choices, you may have to make some adjust- ments to your DVD player (usually with the

“Audio Select” button or in a menu screen on the disc) to send a full 5.1 feed to the AVR 510. It is also possible for the type of sig- nal feed to change during the course of a DVD playback. In some cases, the previews of special material will only be recorded in 2.0 audio, while the main feature is available in 5.1 audio. As long as your DVD player is set for 6-channel output, the AVR 510 will automatically sense changes to the bitstream and channel count and reflect them in these indicators.

The letters used by the Speaker/Channel Input Indicators Q also flash to indicate when a bitstream has been interrupted. This will happen when a digital input source is selected before the playback starts, or when a digital source such as a DVD is paused. The flashing indicators remind you that the play- back has stopped due to the absence of a digital signal and not through any fault of the AVR 510. This is normal, and the digital play- back will resume once the playback is started again.

Night Mode

A special feature of Dolby Digital is the Night mode, which enables AC-3 input sources to be played back with full digital intelligibility while reducing the minimum peak level by 1/4 to 1/3. This prevents abruptly loud transitions from dis- turbing others, without reducing the impact of the digital source. The Night mode is available only when Dolby Digital signals with special data are being played.

The Night mode may be engaged when a Dolby Digital DVD is playing by pressing the Night Mode Button l on the remote. Next, press the ⁄/¤ buttons n to select either the mid- dle range or full compression versions of the Night mode. To turn the Night mode off, press the ⁄/¤ buttons n until the message in the lower third of the video display and the Main Information Display Y reads D-Range Off. When the Night mode is active, the Night Mode Indicator O will also light.

The Night mode may also be selected to always be on at either level of compression using the options in the Surround Setup Menu. See page 21 for information on using the menus to set this option.

, HDCD®, High Definition Compatible Digital® and Pacific Microsonics™ are either registered trademarks or trademarks of Pacific Microsonics, Inc., in the United States and/or other countries. HDCD System manufactured under license from Pacific Microsonics, Inc.

29OPERATION

Page 28 Page 30
Image 29
Page 28 Page 30
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Multiple Digital Inputs and OutputsUnpacking Safety InformationImportant Safety Information # Digital Optical 3 Input Set Button  Input Indicators Ò DelayFront Panel Controls Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control Functions37 6-Ch. Direct Input Press this button ` Preset Up/Down When the tuner isTo select the component connected to Channel Direct Input ª as the sourceBetween the AM and FM bands Zone II Remote Control FunctionsSystem Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputsVideo Equipment Connections System and Power ConnectionsVideo Connection Notes Multiroom IR LinkExternal Audio Decoder Connection External Audio Power Amplifier ConnectionsAC Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupSetting the System Configuration Memories Plug the AC Power Cord into an unswitched AC outletUsing the On-Screen Display Or the ⁄/¤ buttons n on the remote Input SetupSurround Setup Night Mode Settings Buttons on the remote will take you to the delay settingsDelay Settings Surround Speaker SetupInformation Display Y Output Level AdjustmentIf no subwoofer is connected to AVR 510 off using the Main Power Switch Using EzSetManual Output Level Adjustment Additional Input Adjustments Source Selection OperationBasic Operation Surround Mode Chart Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Dolby DigitalNight Mode Digital Status IndicatorsAddition to the bitstream indicators, MP3 Audio Playback Tuner OperationPCM Audio Playback Preset Tuning Output Level Trim AdjustmentRecalling Preset Stations Volume Control Ó 34 îChannel Direct Input Memory BackupTurn-On Volume Level Advanced FeaturesSemi-OSD Settings Display Brightness AVR 510’s Main Information DisplayFull-OSD Time-Out Adjustment Installation Multiroom SetupMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteMacro Programming Learning CodesErasing Learned Codes Mode Selector/Channel Down button k Erasing Macro CommandsPress the AVR Selector f Programmed Device FunctionsTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Preset Down Preset UpTune Up DirectSetup Code Table TV 001 011 030 033 042 044 100 107 115 154 160 167 168 084175 176 021 031Setup Code Table VCR 057 058 159147 166 070 074 078 086 114 125 150 167 172Setup Code Table CD 020 036 056 057 064 065 089 090 091 092 096 099 104 212 037 038 045 046 171 175 202 203015 075 109 119 158 183 204 039 051 138 149 209Setup Code Table Audio Setup Code Table TapeSetup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 053 214 111 112 213055 056 061 099 100 101 207 063 115Processor Reset Troubleshooting GuideInformation from nonencoded programs Lights, motors or other electrical appliancesPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents